•Confinement of single-bacteria in picoliter droplets accelerates growth detection.•Integrated biosensing platform consists of monolithic device and single-step workflow.•High-throughput platform can be operated in continuous flow.•Platform used to determine E. coli susceptibility to gentamicin after 1 h. incubation.There remains an urgent need for rapid diagnostic methods that can evaluate antibiotic resistance for pathogenic bacteria in order to deliver targeted antibiotic treatments. Toward this end, we present a rapid and integrated single-cell biosensing platform, termed dropFAST, for bacterial growth detection and antimicrobial susceptibility assessment. DropFAST utilizes a rapid resazurin-based fluorescent growth assay coupled with stochastic confinement of bacteria in 20 pL droplets to detect signal from growing bacteria after 1 h incubation, equivalent to 2–3 bacterial replications. Full integration of droplet generation, incubation, and detection into a single, uninterrupted stream also renders this platform uniquely suitable for in-line bacterial phenotypic growth assessment. To illustrate the concept of rapid digital antimicrobial susceptibility assessment, we employ the dropFAST platform to evaluate the antibacterial effect of gentamicin on E. coli growth.

DNA methylation is a fundamental means of epigenetic gene regulation that occurs in virtually all cell types. In many higher organisms, including humans, it plays vital roles in cell differentiation and homeostatic maintenance of cell phenotype. The control of DNA methylation has traditionally been attributed to a highly coordinated, linear process, whose dysregulation has been associated with numerous pathologies including cancer, where it occurs early in, and even prior to, the development of neoplastic tissues. Recent experimental evidence has demonstrated that, contrary to prevailing paradigms, methylation patterns are actually maintained through inexact, dynamic processes. These processes normally result in minor stochastic differences between cells that accumulate with age. However, various factors, including cancer itself, can lead to substantial differences in intercellular methylation patterns, viz. methylation heterogeneity. Advancements in molecular biology techniques are just now beginning to allow insight into how this heterogeneity contributes to clonal evolution and overall cancer heterogeneity. In the current review, we begin by presenting a didactic overview of how the basal bimodal methylome is established and maintained. We then provide a synopsis of some of the factors that lead to the accrual of heterogeneous methylation and how this heterogeneity may lead to gene silencing and impact the development of cancerous phenotypes. Lastly, we highlight currently available methylation assessment techniques and discuss their suitability to the study of heterogeneous methylation.

Nucleic acid analysis has enhanced our understanding of biological processes and disease progression, elucidated the association of genetic variants and disease, and led to the design and implementation of new treatment strategies. These diverse applications require analysis of a variety of characteristics of nucleic acid molecules: size or length, detection or quantification of specific sequences, mapping of the general sequence structure, full sequence identification, analysis of epigenetic modifications, and observation of interactions between nucleic acids and other biomolecules. Strategies that can detect rare or transient species, characterize population distributions, and analyze small sample volumes enable the collection of richer data from biosamples. Platforms that integrate micro- and nano-fluidic operations with high sensitivity single molecule detection facilitate manipulation and detection of individual nucleic acid molecules. In this review, we will highlight important milestones and recent advances in single molecule nucleic acid analysis in micro- and nano-fluidic platforms. We focus on assessment modalities for single nucleic acid molecules and highlight the role of micro- and nano-structures and fluidic manipulation. We will also briefly discuss future directions and the current limitations and obstacles impeding even faster progress toward these goals.

Aberrant methylation of DNA has been identified as an epigenetic biomarker for numerous cancer types. The vast majority of techniques aimed at detecting methylation require bisulfite conversion of the DNA sample prior to analysis, which until now has been a benchtop process. Although microfluidics has potential benefits of simplified operation, sample and reagent economy, and scalability, bisulfite conversion has yet to be implemented in this format. Here, we present a novel droplet microfluidic design that facilitates rapid bisulfite conversion by reducing the necessary processing steps while retaining comparable performance to existing methods. This new format has a reduced overall processing time and is readily scalable for use in high throughput DNA methylation analysis.

Application of droplet microfluidics to combinatorial screening applications remains elusive because of the need for composition-identifying unique barcodes. Here we propose a barcode-free continuous flow droplet microfluidic platform to suit the requirements of combinatorial screening applications. We demonstrate robust and repeatable functioning of this platform with matrix metalloproteinase activity screening as a sample application.

Digital nucleic acid detection is rapidly becoming a popular technique for ultra-sensitive and quantitative detection of nucleic acid molecules in a wide range of biomedical studies. Digital polymerase chain reaction (PCR) remains the most popular way of conducting digital nucleic acid detection. However, due to the need for thermocycling, digital PCR is difficult to implement in a streamlined manner on a single microfluidic device, leading to complex fragmented workflows and multiple separate devices and instruments. Loop-mediated isothermal amplification (LAMP) is an excellent isothermal alternative to PCR with potentially better specificity than PCR because of the use of multiple primer sets for a nucleic acid target. Here we report a microfluidic droplet device implementing all the steps required for digital nucleic acid detection including droplet generation, incubation and in-line detection for digital LAMP. As compared to microchamber or droplet array-based digital assays, the continuous flow operation of this device eliminates the constraints on the number of total reactions imposed by the footprint of the device and the analysis throughput caused by the time for lengthy incubation and transfer of materials between instruments.

Nonviral gene delivery holds great promise not just as a safer alternative to viral vectors in traditional gene therapy applications, but also for regenerative medicine, induction of pluripotency in somatic cells, and RNA interference for gene silencing. Although it continues to be an active area of research, there remain many challenges to the rational design of vectors. Among these, the inability to characterize the composition of nanoparticles and its distribution has made it difficult to probe the mechanism of gene transfection process, since differences in the nanoparticle-mediated transfection exist even when the same vector is used. There is a lack of sensitive methods that allow for full characterization of DNA content in single nanoparticles and its distribution among particles in the same preparation. Here we report a novel spectroscopic approach that is capable of interrogating nanoparticles on a particle-by-particle basis. Using PEI/DNA and PEI-g-PEG/DNA nanoparticles as examples, we have shown that the distribution of DNA content among these nanoparticles was relatively narrow, with the average numbers of DNA of 4.8 and 6.7 per particle, respectively, in PEI/DNA and PEI-g-PEG/DNA nanoparticles. This analysis enables a more accurate description of DNA content in polycation/DNA nanoparticles. It paves the way toward comparative assessments of various types of gene carriers and provides insights into bridging the efficiency gap between viral and nonviral vehicles.

Quantum dots are semiconductor nanocrystals that exhibit exceptional optical and electrical behaviors not found in their bulk counterparts. Following seminal work in the development of water-soluble quantum dots in the late 1990's, researchers have sought to develop interesting and novel ways of exploiting the extraordinary properties of quantum dots for biomedical applications. Since that time, over 10000 articles have been published related to the use of quantum dots in biomedicine, many of which regard their use in detection and diagnostic bioassays. This review presents a didactic overview of fundamental physical phenomena associated with quantum dots and paradigm examples of how these phenomena can and have been readily exploited for manifold uses in nanobiotechnology with a specific focus on their implementation in in vitro diagnostic assays and biodetection.

In this work, a droplet microfluidic platform for genetic mutation detection from crude biosample is described. Single-stream integration of nucleic acid isolation and amplification is realized on a simple fluidic cartridge. Subsequent DNA melting curve is employed with signal normalizing algorithm to differentiate heterozygous K-ras codon 12 c.25G>A mutant from the wild type. This technique showcases an alternative to modular bench-top approaches for genetic mutation screening, which is of interest to decentralized diagnostic platforms.

This paper demonstrates a facile method of generating precise serial dilutions in the form of droplets on an open surface platform. The method relies on the use of surface energy traps (SETs), etched areas of high surface energy on a Teflon coated glass substrate, to assist in the magnetic manipulation of droplets to meter and dispense liquid of defined volumes for the preparation of serial dilutions. The volume of the dispensed liquid can be precisely controlled by the size of the SETs, facilitating generation of concentration profiles of high linearity. We have applied this approach to the generation of serial dilutions of antibiotics for anti-microbial susceptibility testing (AST).

We propose a highly versatile and programmable nanolitre droplet-based platform that accepts an unlimited number of sample plugs from a multi-well plate, performs digitization of these sample plugs into smaller daughter droplets and subsequent synchronization-free, robust injection of multiple reagents into the sample daughter droplets on-demand. This platform combines excellent control of valve-based microfluidics with the high-throughput capability of droplet microfluidics. We demonstrate the functioning of a proof-of-concept device which generates combinatorial mixture droplets from a linear array of sample plugs and four different reagents, using food dyes to mimic samples and reagents. Generation of a one dimensional array of the combinatorial mixture droplets on the device leads to automatic spatial indexing of these droplets, precluding the need to include a barcode in each droplet to identify its contents. We expect this platform to further expand the range of applications of droplet microfluidics to include applications requiring a high degree of multiplexing as well as high throughput analysis of multiple samples.

In this article we present a novel droplet microfluidic chip enabling amplification-free detection of single pathogenic cells. The device streamlines multiple functionalities to carry out sample digitization, cell lysis, probe–target hybridization for subsequent fluorescent detection. A peptide nucleic acid fluorescence resonance energy transfer probe (PNA beacon) is used to detect 16S rRNA present in pathogenic cells. Initially the sensitivity and quantification abilities of the platform are tested using a synthetic target mimicking the actual expression level of 16S rRNA in single cells. The capability of the device to perform “sample-to-answer” pathogen detection of single cells is demonstrated using E. coli as a model pathogen.

We report a novel modification of silicone elastomer polydimethylsiloxane (PDMS) with a polymer graft that allows interfacial bonding between an elastomer and glass substrate to be performed without exposure of the substrate to harsh treatment conditions, such as oxygen plasma. Organic molecules can thus be patterned within microfluidic channels and still remain functional post-bonding. In addition, after polymer grafting the PDMS can be stored in a desiccator for at least 40 days, and activated upon exposure to acidic buffer for bonding. The bonded devices remain fully bonded in excess of 80 psi driving pressure, with no signs of compromise to the bond integrity. Finally, we demonstrate the compatibility of our method with biological molecules using a proof-of-concept DNA sensing device, in which fluorescently-labelled DNA targets are successfully captured by a patterned probe in a device sealed using our method, while the pattern on a plasma-treated device was completely destroyed. Therefore, this method provides a much-needed alternative bonding process for incorporation of biological molecules in microfluidic devices.

Newly discovered nanoparticle properties have driven the development of novel applications and uses. We report a new observation where the electrophoretic mobility of a quantum dot/DNA nanoassembly can be precisely modulated by the degree of surface DNA conjugation. By using streptavidin-coated quantum dots (QDs) as nanotethers to gather biotin-labeled DNA into electrophoretic nanoassemblies, the QD surface charge is modulated and transformed into electrophoretic mobility shifts using standard agarose gel electrophoresis. Typical fluorescent assays quantify based on relative intensity. However, this phenomenon uses a novel approach that accurately maps DNA quantity into shifts in relative band position. This property was applied in a QD-enabled nanoassay called quantum dot electrophoretic mobility shift assay (QEMSA) that enables accurate quantification of DNA targets down to 1.1-fold (9%) changes in quantity, beyond what is achievable in qPCR. In addition to these experimental findings, an analytical model is presented to explain this behavior. Finally, QEMSA was applied to both genetic and epigenetic analysis of cancer. First, it was used to analyze copy number variation (CNV) of the RSF1/HBXAP gene, where conventional approaches for CNV analysis based on comparative genomic hybridization (CGH), microarrays, and qPCR are unable to reliably differentiate less than 2-fold changes in copy number. Then, QEMSA was used for DNA methylation analysis of the p16/CDK2A tumor suppressor gene, where its ability to detect subtle changes in methylation was shown to be superior to that of qPCR.Keywords: copy number variation; DNA; DNA methylation; electrophoretic mobility; nanotether; quantum dot

We report a novel micro magnetic gyromixer designed for accelerating mixing hence reactions in droplets. The gyromixer is fabricated with magnetite-PDMS composite using soft lithography. The mixer spins and balances itself on the droplet surface through the gyroscopic effect, rapidly homogenizing the enclosed reagents by stretching and folding internal fluid streamlines to enhance mixing. We examined the capability of the gyromixer for improving biochemical reactions in droplets by monitoring the biotin–streptavidin binding as a linker in a quantum dot fluorescence resonant energy transfer sensing system. The remotely controlled gyromixer exhibits high flexibility and potential for integration in a variety of droplet-based miniaturized total analysis systems to reduce turnaround times.

Single-molecule free solution hydrodynamic separation (SML-FSHS) cohesively integrates cylindrical illumination confocal spectroscopy with free solution hydrodynamic separation. This technique enables single-molecule analysis of size separated DNA with 100% mass detection efficiency, high sizing resolution and wide dynamic range, surpassing the performance of single molecule capillary electrophoresis. Furthermore, SML-FSHS required only a bare fused silica microcapillary and simple pressure control rather than complex high voltage power supplies, sieving matrices, and wall coatings. The wide dynamic range and high sizing resolution of SML-FSHS was demonstrated by separating both large DNA (23 vs 27 kbp) and small DNA (100 vs 200 bp) under identical conditions. Separations were successfully performed with near zero sample consumption using as little as 5 pL of sample and 240 yoctomoles (∼150 molecules) of DNA. Quantitative accuracy was predominantly limited by molecular shot noise. Furthermore, the ability of this method to analyze of single molecule nanosensors was investigated. SML-FSHS was used to examine the thermodynamic equilibrium between stochastically open molecular beacon and target-bound molecular beacon in the detection of E. coli 16s rRNA targets.

Circulating nucleic acid (CNA) has been the focus of recent research as a noninvasive source of biomarker candidates. Among these markers, DNA fragment size has shown promise for discerning the source of CNA molecules in cancer and prenatal diagnostics. We have developed a one-step assay for analyzing circulating DNA size and quantity directly in human serum. Microfluidic cylindrical illumination confocal spectroscopy and fluorescence burst size analysis are used to individually count and size fluorescently-labeled CNA molecules as they are driven through a microfluidic constriction. First, single molecule sizing was performed on λ Hind III digest DNA to obtain a size calibration curve. A linear relation between DNA length and burst size was seen from 564 bp to 27.5 kbp. Subsequently, the single molecule assay parameters were optimized. Finally, DNA sizing analysis was performed on serum samples from both early and late stage lung cancer patients. This assay was performed directly in patient serum using only a single reagent, a simple DNA intercalating dye, and without the need for DNA isolation or enzymatic amplification steps. This demonstrates that microfluidic single molecule spectroscopy can be a rapid, facile, and inexpensive alternative to the established PCR-based methods that have been used near exclusively for CNA analysis.

We demonstrate single biomolecule detection and quantification within sub-nanolitre droplets through application of Cylindrical Illumination Confocal Spectroscopy (CICS) and droplet confinement within a retractable microfluidic constriction.

We have developed a microfluidic device capable of fully integrated sample preparation and gene analysis from crude biosamples such as whole blood. Our platform takes the advantage of the silica superparamagnetic particle based solid phase extraction to develop an all-in-one scheme that performs cell lysis, DNA binding, washing, elution and the PCR in the same reaction chamber. The device also employs a unique reagent loading scheme, allowing efficient preparation of multiple reactions via a single injection channel. In addition, PCR is performed in a droplet-in-oil manner, eliminating the need for chamber sealing. The combination of these design features greatly reduces the complexity in implementing fully integrated lab-on-a-chip systems for genetic detection, facilitating parallel analysis of multiple samples or genes on a single microchip. The capability of the device is demonstrated by performing DNA isolation from the human whole blood sample and analyzing the Rsf-1 gene using the TaqMan probe based gene specific PCR assays.

We performed on-chip DNA methylation analysis using methylation-specific PCR (MSP) within an arrayed micro droplet-in-oil platform that is designed for more practical application of microfluidic droplet technologies in clinical applications. Unique features of this ready-to-use device include arrayed primers that are pre-deposited into open micro-reaction chambers and use of the oil phase as a companion fluid for both sample actuation and compartmentalization. These technical advantages allow for infusion of minute amounts of sample for arrayed MSP analysis, without the added complexities inherent in microfluidic droplet-based studies. Ease of use of this micro device is exemplified by analysis of two tumor suppressor promoters, p15 and TMS1 using an on-chip methylation assay. These results were consistent with standard MSP protocols, yet the simplicity of the droplet-in-oil microfluidic PCR platform provides an easy and efficient tool for DNA methylation analysis in a large-scale arrayed manner.

We used inline, micro-evaporators to concentrate and transport DNA targets to a nanoliter single molecule fluorescence detection chamber for subsequent molecular beacon probe hybridization and analysis. This use of solvent removal as a unique means of target transport in a microanalytical platform led to a greater than 5000-fold concentration enhancement and detection limits that pushed below the femtomolar barrier commonly reported using confocal fluorescence detection. This simple microliter-to-nanoliter interconnect for single molecule counting analysis resolved several common limitations, including the need for excessive fluorescent probe concentrations at low target levels and inefficiencies in direct handling of highly dilute biological samples. In this report, the hundreds of bacteria-specific DNA molecules contained in ∼25 microliters of a 50 aM sample were shuttled to a four nanoliter detection chamber through micro-evaporation. Here, the previously undetectable targets were enhanced to the pM regime and underwent probe hybridization and highly-efficient fluorescent event analysis via microfluidic recirculation through the confocal detection volume. This use of microfluidics in a single molecule detection (SMD) platform delivered unmatched sensitivity and introduced compliment technologies that may serve to bring SMD to more widespread use in replacing conventional methodologies for detecting rare target biomolecules in both research and clinical labs.

This paper describes the fabrication and application of microfluidic devices containing collagen vitrigel (CV) used as both a functional and sacrificial cell growth substrate for the development of corneal microtissue patches. Within the device, vacuum fixation of the CV in a dehydrated state enables quick integration with standard multilayer soft lithographic techniques, while on-chip rehydration results in a gel-like collagen substrate for microfluidic cell culture. Fluidic connectivity to both the apical and basal side of the CV permits bilayered culture of epithelium and supporting stromal cell layers. In addition, microfluidic introduction of a collagenase etching media enables sacrificial degradation of the supporting CV membrane for development of barrier tissue constructs containing minimal synthetic substrate. The utility of this platform was evaluated by miniaturizing the standard transepithelial permeability (TEP) assay in order to measure the integrity of an array of corneal tissue micropatches.

Nanoscale vectors comprised of cationic polymers that condense DNA to form nanocomplexes are promising options for gene transfer. The rational design of more efficient nonviral gene carriers will be possible only with better mechanistic understanding of the critical rate-limiting steps, such as nanocomplex unpacking to release DNA and degradation by nucleases. We present a two-step quantum dot fluorescence resonance energy transfer (two-step QD-FRET) approach to simultaneously and non-invasively analyze DNA condensation and stability. Plasmid DNA, double-labeled with QD (525 nm emission) and nucleic acid dyes, were complexed with Cy5-labeled cationic gene carriers. The QD donor drives energy transfer stepwise through the intermediate nucleic acid dye to the final acceptor Cy5. At least three distinct states of DNA condensation and integrity were distinguished in single particle manner and within cells by quantitative ratiometric analysis of energy transfer efficiencies. This novel two-step QD-FRET method allows for more detailed assessment of the onset of DNA release and degradation simultaneously.

The recent proliferation of platforms designed to handle arrays of nano- and picolitre volumes is in response to the need to perform biological assays on discrete entities, such as single cells. However, a critical challenge associated with this trend for in vitro compartmentalization is the need for highly sensitive, yet low-volume detection platforms. In this paper, we coupled confocal fluorescence detection with recirculating microfluidic control to perform single particle DNA assays within five nL chambers. The performance of this low-volume assay was shown to match that of traditional single molecule detection platforms. However, volume requirements per measurement were nearly 3 orders of magnitude less than conventional systems, enabling future integration with lab-on-a-chip systems that require discrete or digitalized sample processing.

We demonstrate a highly sensitive method to characterize the structural composition and intracellular fate of polymeric DNA nanocomplexes, formed by condensing plasmid DNA with cationic polymers through electrostatic interactions. Rational design of more efficient polymeric gene carriers will be possible only with mechanistic insights of the rate-limiting steps in the non-viral gene transfer process. To characterize the composition and binding dynamics of nanocomplexes, plasmid and its polymer carrier within nanocomplexes were labeled with quantum dots (QDs) and fluorescent organic dyes, respectively, as a donor and acceptor pair for fluorescence resonance energy transfer (FRET). The high signal-to-noise ratio in QD-mediated FRET enabled precise detection of discrete changes in nanocomplex state at the single-particle level, against various intracellular microenvironments. The distribution and unpacking of individual nanocomplexes within cells could thus be unambiguously followed by fluorescence microscopy. QD-FRET is a highly sensitive and quantitative method to determine the composition and dynamic stability of nanocomplexes during intracellular transport, where barriers to gene delivery may be identified to facilitate gene carrier optimization.

This paper reports a highly sensitive homogenous method for comparative quantification of nucleic acids based on single-molecule detection (SMD) and molecular beacons (MBs). Two different color MBs were used to perform a separation-free comparative hybridization assay for simultaneous quantification of both target and control strands. A fluorescent burst, emitted from a single hybrid when it passes through a minuscule laser-focused region, is detected with high signal-to-noise ratio (SNR) by using single-molecule fluorescence spectroscopy. Targets are quantified via counting of discrete fluorescent bursts. The high SNR achieved in both detection channels overcame the complications of fluorescent variability usually observed in dual-color ensemble measurements. In comparison with the conventional ensemble methods, this method improved the detection limit by 3 orders of magnitude and reduced the probe consumption by 6 orders of magnitude, facilitating a highly sensitive approach for comparative quantification of nucleic acids and offering great promise for genomic quantification without amplification.

Two new classes of quantum dot (QD)–mediated biosensing methods have been developed to detect specific DNA sequences in a separation-free format. Both methods use 2 target-specific oligonucleotide probes to recognize a specific target. The first method is based on cross-linking of 2 QDs with distinct emission wavelengths caused by probe-target hybridization. The second method uses QDs as both fluorescent tags and nanoscaffolds that capture multiple fluorescently labeled hybridization products, resulting in amplified target signals. The presence of targets is determined according to spatiotemporal coincidence of 2 different wavelength fluorescent signals emitted from the QD/DNA/probe complexes. With a single wavelength-excitation, dual wavelength-emission confocal spectroscopic system, the fluorescent signals can be measured with single-dot/molecule sensitivity. Compared with other nanoparticle-based, separation-free assays, our method shows advantages in simplicity, testing speed, and multiplexed applications.

Cylindrical illumination confocal spectroscopy (CICS) is a new implementation of single molecule detection that can be generically incorporated into any microfluidic system and allows highly quantitative and accurate analysis of single fluorescent molecules. Through theoretical modeling of confocal optics and Monte Carlo simulations, one-dimensional beam shaping is used to create a highly uniform sheet-like observation volume that enables the detection of digital fluorescence bursts while retaining single fluorophore sensitivity. First, we theoretically show that when used to detect single molecules in a microchannel, CICS can be optimized to obtain near 100% mass detection efficiency, <10% relative SD in burst heights, and a high signal/noise ratio. As a result, CICS is far less sensitive to thresholding artifacts than traditional single molecule detection and significantly more accurate at determining both burst rate and burst parameters. CICS is then experimentally implemented, optically characterized, and integrated into separate two microfluidic devices for the analysis of fluorescently stained plasmid DNA and single Cy5 labeled oligonucleotides. CICS rectifies the limitations of traditional confocal spectroscopy-based single molecule detection without the significant operational complications of competing technologies.

Fluorescence correlation spectroscopy (FCS) can resolve the intrinsic fast-blinking kinetics (FBKs) of fluorescent molecules that occur on the order of microseconds. These FBKs can be heavily influenced by the microenvironments in which the fluorescent molecules are contained. In this work, FCS is used to monitor the dynamics of fluorescence emission from Cy5 labeled on DNA probes. We found that the FBKs of Cy5 can be tuned by having more or less unpaired guanines (upG) and thymines (upT) around the Cy5 dye. The observed FBKs of Cy5 are found to predominantly originate from the isomerization and back-isomerization processes of Cy5, and Cy5-nucleobase interactions are shown to slow down these processes. These findings lead to a more precise quantification of DNA hybridization using FCS analysis, in which the FBKs play a major role rather than the diffusion kinetics. We further show that the alterations of the FBKs of Cy5 on probe hybridization can be used to differentiate DNA targets with single-nucleotide differences. This discrimination relies on the design of a probe-target-probe DNA three-way-junction, whose basepairing configuration can be altered as a consequence of a single-nucleotide substitution on the target. Reconfiguration of the three-way-junction alters the Cy5-upG or Cy5-upT interactions, therefore resulting in a measurable change in Cy5 FBKs. Detection of single-nucleotide variations within a sequence selected from the Kras gene is carried out to validate the concept of this new method.

Limited tools exist that are capable of monitoring nucleic acid conformations, fluctuations, and distributions in free solution environments. Single molecule free solution hydrodynamic separation enables the unique ability to quantitatively analyze nucleic acid biophysics in free solution. Single molecule fluorescent burst data and separation chromatograms can give layered insight into global DNA conformation, binding interactions, and molecular distributions. First, we show that global conformation of individual DNA molecules can be directly visualized by examining single molecule fluorescent burst shapes and that DNA exists in a dynamic equilibrium of fluctuating conformations as it is driven by Poiseuille flow through micron-sized channels. We then show that this dynamic equilibrium of DNA conformations is reflected as shifts in hydrodynamic mobility that can be perturbed using salt and ionic strength to affect packing density. Next, we demonstrate that these shifts in hydrodynamic mobility can be used to investigate hybridization thermodynamics and binding interactions. We distinguish and classify multiple interactions within a single sample, and demonstrate quantification amidst large concentration differences for the detection of rare species. Finally, we demonstrate that these differences can resolve perfect complement, 2 bp mismatched, and 3 bp mismatched sequences. Such a system can be used to garner diverse information about DNA conformation and structure, and potentially be extended to other molecules and mixed-species interactions, such as between nucleic acids and proteins or synthetic polymers.