All-optical switching—controlling light with light—has the potential to meet the ever-increasing demand for data transmission bandwidth. The development of organic π-conjugated molecular materials with the requisite properties for all-optical switching applications has long proven to be a significant challenge. However, recent advances demonstrate that polymethine dyes have the potential to meet the necessary requirements. In this review, we explore the theoretical underpinnings that guide the design of π-conjugated materials for all-optical switching applications. We underline, from a computational chemistry standpoint, the relationships among chemical structure, electronic structure, and optical properties that make polymethines such promising materials.

Gallium-doped zinc oxide (GZO) surfaces, both bare and modified with chemisorbed phosphonic acid (PA) molecules, are studied using a combination of density functional theory calculations and ultraviolet and X-ray photoelectron spectroscopy measurements. Excellent agreement between theory and experiment is obtained, which leads to an understanding of: i) the core-level binding energy shifts of the various oxygen atoms belonging to different surface sites and to the phosphonic acid molecules; ii) the GZO work-function change upon surface modification, and; iii) the energy level alignments of the frontier molecular orbitals of the PA molecules with respect to the valence band edge and Fermi level of the GZO surface. Importantly, both density of states calculations and experimental measurements of the valence band features demonstrate an increase in the density of states and changes in the characteristics of the valence band edge of GZO upon deposition of the phosphonic acid molecules. The new valence band features are associated with contributions from surface oxygen atoms near a defect site on the oxide surface and from the highest occupied molecular orbitals of the phosphonic acid molecules.

Organic solar cells based on the combination of squaraine dyes (as electron donors) and fullerenes (as electron acceptors) have recently garnered much attention. Here, molecular dynamics simulations are carried out to investigate the evolution of a squaraine–C₆₀ bilayer interface as a function of the orientation and order of the underlying squaraine layer. Electronic couplings between the main electronic states involved in exciton dissociation and charge (polaron pair) recombination are derived for donor–acceptor complexes extracted from the simulations. The results of the combined molecular-dynamics−quantum-mechanics approach provide insight into how the degree of molecular order and the dynamics at the interface impact the key processes involved in the photovoltaic effect.

At metal/organic interfaces, the insertion of an organic monolayer can significantly modify the surface properties of the substrate, especially in terms of charge injection across the interface. Herein, we study the formation of an insulating monolayer of morpholine or amine-functionalized polystyrene on Al(111) and Au(111) surfaces and its impact on surface work-function and charge injection. First-principles calculations based on Density Functional Theory have been carried out and point to a significant decrease in the work-function of modified metal surfaces; this is in very good agreement with ultraviolet photoemission spectroscopy measurements performed on the Au(111) surface. In addition, a bilayer cathode, consisting of a thin film of high-work-function metal, such as Al and Au, and a layer of amine-functionalized polystyrene, was also fabricated and tested in organic light-emitting diodes. Such bilayer structures exhibit substantially enhanced efficiency when compared with controls without the functionalized polymers. Our combined theoretical and experimental investigation gives insight into how a thin layer of a commodity polymer can be used to transform rather high-work-function metals into high-performance cathodes to provide efficient electron injection.

The ability to detail how molecules pack in the bulk and at the various materials interfaces in the active layer of an organic solar cell is important to further understanding overall device performance. Here, [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM), a preferred electron-acceptor material in organic solar cells, is studied through molecular dynamics (MD) simulations; the goal is to examine the effects of temperature and trace solvents on the packing and morphological features of bulk PCBM. Solubility (miscibility) parameters, melting and order-disorder transitions, surface energies, and orientational distributions as a function of different starting configurations are discussed. On the basis of the derived morphologies, electronic structure calculations and a kinetic Monte Carlo approach are combined to evaluate the parameters impacting electron mobility in crystalline and amorphous PCBM structures.

A combination of density functional theory and experimental measurements via ultraviolet and X-ray photoelectron spectroscopies is used to explore the nature of the interface between the stoichiometric molybdenum trioxide (MoO₃) or its under-stoichiometric counterpart with oxygen vacancies, and an organic hole-transport layer represented by 4,4′-N,N′-dicarbazole-biphenyl (CBP). Upon adsorption of CBP, special attention is paid to i) the appearance of gap states and the reduction of the molybdenum oxide surface, and ii) the evolution of the work function. Very good agreement is found between theory and experiment. The near alignment of the CBP highest occupied molecular orbital with the Fermi level and the conduction band edge of molybdenum oxide points to facile hole collection or injection.

Herein, the synthesis and properties of alkyne-bridged carbocations, which are analogous in structure to cyanine dyes, are reported. An alkene-bridged dye, linked at the third position of the indole, was also synthesized as a reference compound. These new carbocations are stable under ambient conditions, allowing characterization by UV/Vis and NMR (¹H and ¹³C) spectroscopies. These techniques revealed a large degree of delocalization of the positive charge, similar to a previously reported porphyrin carbocation. The linear and nonlinear optical properties are compared with cyanine dyes and triarylmethyl cations, to investigate the effects of the bond-length alternation and the overall molecular geometry. The value of Re(γ), the real part of the third-order microscopic polarizability, of −1.3×10⁻³³ esu for the alkyne-linked cation is comparable to that of a cyanine dye of similar length. Nondegenerate two-photon absorption spectra showed that the alkene-bridged dye exhibited characteristics of cyanines, whereas the alkyne-bridged dye is reminiscent of octupolar chromophores, such as the triarylmethyl carbocation brilliant green. Such attributes were confirmed and rationalized by quantum chemical calculations.

A theoretical study using density functional theory is undertaken to gain insight into how the structural, electronic, and electron-transfer characteristics of three Fluoroarene-oligothiophene semiconductors influence the preferred transport of electrons versus holes in field-effect transistor applications. The intermolecular electronic coupling interactions are analyzed through both a simplified energy-splitting in dimer (ESID) model and as a function of the entire dimer Hamiltonian in order to understand the impact of site energy differences; our results indicate that these differences are generally negligible for the series and, hence, use of the ESID model is valid. In addition, we also investigate the reduction and oxidation processes to understand the magnitudes of the intramolecular reorganization energy for the charge-hopping process and expected barrier heights for electron and hole injection into these materials. From the electronic coupling and intramolecular reorganization energies, estimates of the nearest-neighbor electron-transfer hopping rate constant for electrons are obtained. The ionization energetics suggest favored electron injection for the system with perfluoroarene groups at the end of the thiophene core, in agreement with experiments. The combined analyses of the electron-transfer properties and ionization processes suggest possible ambipolar behavior for these materials under favorable device conditions.

Many squaraines have been observed to exhibit two-photon absorption at transition energies close to those of the lowest energy one-photon electronic transitions. Here, the electronic and vibronic contributions to these low-energy two-photon absorptions are elucidated by performing correlated quantum-chemical calculations on model chromophores that differ in their terminal donor groups (diarylaminothienyl, indolenylidenemethyl, dimethylaminopolyenyl, or 4-(dimethylamino)phenylpolyenyl). For squaraines with diarylaminothienyl and dimethylaminopolyenyl donors and for the longer examples of 4-(dimethylamino)phenylpolyenyl donors, the calculated energies of the lowest two-photon active states approach those of the lowest energy one-photon active (1B_u) states. This is consistent with the existence of purely electronic channels for low-energy two-photon absorption (TPA) in these types of chromophores. On the other hand, for all squaraines containing indolinylidenemethyl donors, the calculations indicate that there are no low-lying electronic states of appropriate symmetry for TPA. Actually, we find that the lowest energy TPA transitions can be explained through coupling of the one-photon absorption (OPA) active 1B_u state with b_u vibrational modes. Through implementation of Herzberg–Teller theory, we are able to identify the vibrational modes responsible for the low-energy TPA peak and to reproduce, at least qualitatively, the experimental TPA spectra of several squaraines of this type.