Ultrafast dynamics of protein side chains are involved in important biological processes such as ligand binding, protein folding, and hydration. In addition, the dynamics of a side chain can report on local environments within proteins. While protein side chain dynamics have been probed for proteins in solution with nuclear magnetic resonance and infrared methods for decades, information about side chain dynamics at interfaces is lacking. At the same time, the dynamics and motions of side chains can be particularly important for interfacial binding and protein-driven surface manipulation. We here demonstrate that ultrafast reorientation dynamics of leucine amino acids at interfaces can be recorded in situ and in real time using polarization- and time-resolved pump–probe sum frequency generation (SFG). Combined with molecular dynamics simulations, time-resolved SFG was used to probe the reorientation of the isopropyl methyl groups of l-leucine at the air–water interface. The data show that the methyl units reorient diffusively at an in plane rate of Dφ = 0.07 rad2/ps and an out of plane rate of Dθ = 0.05 rad2/ps.

Cell-penetrating peptides (CPPs) are promising molecules as drug carriers. However, because their uptake mainly involves endocytic mechanisms, endosomal trapping of the carrier (and drug) remains a high barrier for biomedical applications. The viral fusion mimic GALA, a pH-triggered CPP, takes advantage of the decreasing pH during endosome maturation to selectively attack endosomal membranes. Below pH 6, the sequence folds into a helix and can disrupt membranes. In this study, we show that the lipid bilayer radius-of-curvature has a negligible effect on GALA-induced leakage kinetics and that GALA remains pH responsive after inserting into a lipid membrane. The peptide can be reversibly “switched” between its inactive and active states after incorporation into the hydrophobic environment of lipid membranes, even after substantially interacting with lipid chains. This ability makes GALA-based delivery a potentially safe and efficient strategy for endosomal escape.

Previous studies have reported that the metastable vaterite phase of calcium carbonate can be stabilized in solution by acidic additives. Here we demonstrate that vaterite can also be stabilized directly at surfaces by engineered peptides. Our data show that the mineralisation occurs in a ‘self-templating’ process where calcium ions restructure the peptide backbone, which in turn allows for effective vaterite precipitation.

pH-sensitive viral fusion protein mimics are widely touted as a promising route towards site-specific delivery of therapeutic compounds across lipid membranes. Here, we demonstrate that a fusion protein mimic, designed to achieve a reversible, pH-driven helix-coil transition mechanism, retains its functionality when covalently bound to a surface.

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy provides detailed information about the orientation and alignment of thin films. NEXAFS is a synchrotron-based technique—the availability of beam-time per user is typically limited to no more than a few weeks per year. The limited availability is currently a true barrier for using NEXAFS in combinatorial studies of molecular alignment. We have recently demonstrated how large area full field NEXAFS imaging allows users to pursue combinatorial studies of surface chemistry. Now we report an extension of this approach which allows the acquisition of orientation information from a single NEXAFS image. An array with 80 elements (samples), containing eight series of different surface modifications, was mounted on a curved substrate allowing the collection of NEXAFS spectra with a range of orientations with respect to the X-ray beam. Images collected from this array show how hyperspectral NEXAFS data collected from curved surfaces can be used for high-throughput molecular orientation analysis.Keywords: alkanethiol; angle-resolved photoemission; combinatorial science; imaging NEXAFS; molecular order; self-assembled monolayers

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, as a technique, offers detailed information about the bonding environment of molecules at a surface. However, because it is a synchrotron based method, beam-time is limited and users must typically prioritize and narrowly define the scopes of experiments. In this study, we demonstrate a novel method that opens up the possibility of the use of large area NEXAFS imaging to pursue combinatorial studies. To explore the capabilities of the NIST full field NEXAFS microscope available at the National Synchrotron Light Source as a high throughput imaging instrument, we collected NEXAFS images from a sample array consisting of 144 different elements with a periodic sequence of different surface modifications. NEXAFS images collected from this model system illustrate how hyperspectral NEXAFS data can be used for parallel analysis of large numbers of samples either directly from the overall image or by extracting spectra from regions of interest.

The surface of a material is rapidly covered with proteins once that material is placed in a biological environment. The structure and function of these bound proteins play a key role in the interactions and communications of the material with the biological environment. Thus, it is crucial to gain a molecular level understanding of surface bound protein structure. While X-ray diffraction and solution phase NMR methods are well established for determining the structure of proteins in the crystalline or solution phase, there is not a corresponding single technique that can provide the same level of structural detail about proteins at surfaces or interfaces. However, recent advances in sum frequency generation (SFG) vibrational spectroscopy have significantly increased our ability to obtain structural information about surface bound proteins and peptides. A multi-technique approach of combining SFG with (1) protein engineering methods to selectively introduce mutations and isotopic labels, (2) other experimental methods such as time-of-flight secondary ion mass spectrometry (ToF-SIMS) and near edge X-ray absorption fine structure (NEXAFS) to provide complementary information, and (3) molecular dynamic (MD) simulations to extend the molecular level experimental results is a particularly promising route for structural characterization of surface bound proteins and peptides. By using model peptides and small proteins with well-defined structures, methods have been developed to determine the orientation of both backbone and side chains to the surface.

Extracellular biomineralization proteins such as salivary statherin control the growth of hydroxyapatite (HAP), the principal component of teeth and bones. Despite the important role that statherin plays in the regulation of hard tissue formation in humans, the surface recognition mechanisms involved are poorly understood. The protein–surface interaction likely involves very specific contacts between the surface atoms and the key protein side chains. This study demonstrates for the first time the power of combining near-edge X-ray absorption fine structure (NEXAFS) spectroscopy with element labeling to quantify the orientation of individual side chains. In this work, the 15 amino acid N-terminal binding domain of statherin has been adsorbed onto HAP surfaces, and the orientations of phenylalanine rings F7 and F14 have been determined using NEXAFS analysis and fluorine labels at individual phenylalanine sites. The NEXAFS-derived phenylalanine tilt angles have been verified with sum frequency generation spectroscopy.

•SAP(E)-membrane interaction is accompanied by a structural transformation.•Surface propensity and penetration depth change with the model membranes' charge.•No direct insertion into the hydrophobic model membrane core was observed.Cell-penetrating peptides (CPPs) are short membrane-permeating amino acid sequences that can be used to deliver cargoes, e.g. drugs, into cells. The mechanism for CPP internalization is still subject of ongoing research. An interesting family of CPPs is the sweet arrow peptides – SAP(E) – which are known to adopt a polyproline II helical secondary structure. SAP(E) peptides stand out among CPPs because they carry a net negative charge while most CPPs are positively charged, the latter being conducive to electrostatic interaction with generally negatively charged membranes. For SAP(E)s, an internalization mechanism has been proposed, based on polypeptide aggregation on the cell surface, followed by an endocytic uptake. However, this process has not yet been observed directly – since peptide–membrane interactions are inherently difficult to monitor on a molecular scale. Here, we use sum frequency generation (SFG) vibrational spectroscopy to investigate molecular interactions of SAP(E) with differently charged model membranes, in both mono- and bi-layer configurations. The data suggest that the initial binding mechanism is accompanied by structural changes of the peptide. Also, the peptide-model membrane interaction depends on the charge of the lipid headgroup with phosphocholine being a favorable binding site. Moreover, while direct penetration has also been observed for some CPPs, the spectroscopy reveals that for SAP(E), its interaction with model membranes remains limited to the headgroup region, and insertion into the hydrophobic core of the lipid layer does not occur.Figure optionsDownload full-size imageDownload high-quality image (179 K)Download as PowerPoint slide

Silaffins, long chain polyamines, and other biomolecules found in diatoms are involved in the assembly of a large number of silica nanostructures under mild, ambient conditions. Nanofabrication researchers have sought to mimic the diatom’s biosilica production capabilities by engineering proteins to resemble aspects of naturally occurring biomolecules. Such mimics can produce monodisperse biosilica nanospheres, but in vitro production of the variety of intricate biosilica nanostructures that compose the diatom frustule is not yet possible. In this study we demonstrate how LK peptides, composed solely of lysine (K) and leucine (L) amino acids arranged with varying hydrophobic periodicities, initiate the formation of different biosilica nanostructures in vitro. When L and K residues are arranged with a periodicity of 3.5 the α-helical form of the LK peptide produces monodisperse biosilica nanospheres. However, when the LK periodicity is changed to 3.0, corresponding to a 310 helix, the morphology of the nanoparticles changes to elongated rod-like structures. β-strand LK peptides with a periodicity of 2.0 induce wire-like silica morphologies. This study illustrates how the morphology of biosilica can be changed simply by varying the periodicity of polar and nonpolar amino acids.

pH-sensitive viral fusion protein mimics are widely touted as a promising route towards site-specific delivery of therapeutic compounds across lipid membranes. Here, we demonstrate that a fusion protein mimic, designed to achieve a reversible, pH-driven helix-coil transition mechanism, retains its functionality when covalently bound to a surface.

Previous studies have reported that the metastable vaterite phase of calcium carbonate can be stabilized in solution by acidic additives. Here we demonstrate that vaterite can also be stabilized directly at surfaces by engineered peptides. Our data show that the mineralisation occurs in a ‘self-templating’ process where calcium ions restructure the peptide backbone, which in turn allows for effective vaterite precipitation.

The surface of a material is rapidly covered with proteins once that material is placed in a biological environment. The structure and function of these bound proteins play a key role in the interactions and communications of the material with the biological environment. Thus, it is crucial to gain a molecular level understanding of surface bound protein structure. While X-ray diffraction and solution phase NMR methods are well established for determining the structure of proteins in the crystalline or solution phase, there is not a corresponding single technique that can provide the same level of structural detail about proteins at surfaces or interfaces. However, recent advances in sum frequency generation (SFG) vibrational spectroscopy have significantly increased our ability to obtain structural information about surface bound proteins and peptides. A multi-technique approach of combining SFG with (1) protein engineering methods to selectively introduce mutations and isotopic labels, (2) other experimental methods such as time-of-flight secondary ion mass spectrometry (ToF-SIMS) and near edge X-ray absorption fine structure (NEXAFS) to provide complementary information, and (3) molecular dynamic (MD) simulations to extend the molecular level experimental results is a particularly promising route for structural characterization of surface bound proteins and peptides. By using model peptides and small proteins with well-defined structures, methods have been developed to determine the orientation of both backbone and side chains to the surface.