Layer-by-layer coating of nanoparticles with a layer number in the single-digit range has gained increasing attention in the field of nanomedicinal research. However, the impact of using various polyelectrolytes on oligolayer formation and, more importantly, their influence on the interaction with the biological system has not often been considered in the past. Hence, we investigated the polyelectrolyte deposition profiles and resulting surface topographies of up to three polyelectrolyte layers on a flat gold sensor surface using three different polycations, namely, poly(ethylene imine) (PEI), poly(allylamine hydrochloride) (PAH), and poly(diallylammonium chloride) (PD), each in combination with poly(styrenesulfonate) (PSS). Surface plasmon resonance spectroscopy and atomic force microscopy revealed that the PEI/PSS pair in particular showed a so-called overshoot phenomenon, which is associated with partial polyelectrolyte desorption from the surface. This is also reflected by a significant increase in the surface roughness. Then, after having transferred the oligolayer assembly onto nanoparticles of ∼32 nm, we realized that quite similar surface topographies must have emerged on a curved gold surface. A major finding was that the extent of surface roughness contributes significantly to the fashion by which the oligolayer-coated nanoparticles interact with serum proteins and associate with cells. For example, for the PEI/PSS system, both the surface roughness and protein adsorption increased by a factor of ∼12 from the second to third coating layer and, at the same time, the cell association massively decreased to only one-third. Our study shows that surface roughness, along with other particle properties such as size, shape, zeta potential, and hydrophobicity, is another decisive factor for nanoparticles in a biological context, which has indeed been discussed previously but has not to date been investigated for oligolayers.Keywords: AFM; cell association; Layer-by-layer; nanoparticle; planar surface; protein adsorption;

The combination of thiazole orange and thiazole red as an internal energy transfer-based fluorophore pair in oligonucleotides provides an outstanding analytical tool to follow DNA/RNA hybridization through a distinct fluorescence color change from red to green. Herein, we demonstrate that this concept can be applied to small interfering RNA (siRNA) to monitor RNA integrity in living cells in real time with a remarkable dynamic range and excellent contrast ratios in cellular media. Furthermore, we show that our siRNA-sensors still possess their gene silencing function toward the knockdown of enhanced green fluorescent protein in CHO-K1 cells.

A library of 39 strictly linear poly(ethylene glycol)–poly(ethylene imine) (PEG-PEI) diblock copolymers was synthesized for the delivery of plasmid DNA using PEG of 2, 5, or 10 kDa in combination with linear PEI with a molecular weight (MW) ranging from 1.5 to 10.8 kDa. In contrast to other approaches, the copolymers demonstrated a clear separation between the hydrophilic PEG and the nucleic acid condensing PEI moieties. Hence, the hypothesis was that PEG may not sterically counteract the interaction between the nucleic acid and PEI and that consequently, the copolymers are perfectly suited to build small and stable polyplexes. Analysis of the polyplexes revealed structure–function relationships and the general guideline was that the PEG domain had a greater influence on the physicochemical properties of the polyplexes than PEI. A PEG content higher than 50% led to small (< 150 nm), nearly neutral polyplexes with favorable stability. The transfection efficacy of these polyplexes was significantly reduced compared to the PEI homopolymer, but was restored by the application of the corresponding degradable copolymer, which involved a redox triggerable PEG domain. In conclusion, valuable design criteria for the optimization of gene delivery carriers, which is only possible through the screening of such a large library, were gained.

Nanoparticle transport inside the extracellular matrix (ECM) is a crucial factor affecting the therapeutic success. In this work, two in vitro ECM models – a neutrally charged collagen I network with an effective pore size of 0.47 μm and Matrigel, a basement membrane matrix with strong negative charge and effective pore size of 0.14 μm – were assessed for barrier function in the context of diffusing nanoparticles. Nanoparticles with a size of 120 nm were coated with poly(ethylene glycol) (PEG) of different molecular weights – 2, 5 and 20 kDa – over a range of gradually increasing coating densities – precisely 0.2, 2, 8 and 20 PEG/nm2. The PEG corona was imaged in its native state without any drying process by atomic force microscopy, revealing that the experimentally determined arrangement of PEG at the surface did not match with what was theoretically expected. In a systematic investigation of nanoparticle mobility via fluorescence recovery after photobleaching, increasing both PEG MW and PEGylation density gradually improved diffusion properties predominately in collagen. Due to its smaller pore size and electrostatic obstruction, diffusion coefficients were about ten times lower in Matrigel than in the collagen network and an extension of the PEG MW and density did not necessarily lead to better diffusing particles. Consequently, collagen gels were revealed to be a poor model for nanoparticle mobility assessment, as neither their pore size nor their electrostatic properties reflect the expected in vivo conditions. In Matrigel, diffusion proceeded according to a sigmoidal increase with gradually increasing PEG densities showing threshold zeta potentials of 11.6 mV (PEG2kDa) and 13.8 mV (PEG5kDa), below which particles were regarded as mobile. Irrespective of the molecular weight particles with a PEGylation density lower than 2 PEG/nm2 were defined as immobile and those with a PEG coverage of more than 8 PEG/nm2 as mobile.Download high-res image (256KB)Download full-size image

Hyaluronan (HA) is a naturally occurring polysaccharide and well known for its exceptional properties such as high biocompatibility and biodegradability, along with a low immunogenicity. Besides its use for various biomedical applications it recently came into focus as a favorable excipient for the formulation of various ocular therapeutics. This review article summarizes the ocular distribution of HA and its most heavily investigated binding protein “cluster of differentiation 44” (CD44) which is the rationale for the clinical use of HA, primarily as an additive in ocular applications ranging from eye drops to contact lenses. Moreover, examples will be given for using HA in various pre-clinical approaches to generate entirely new therapeutics, most notably in the field of nanotechnology.Download high-res image (128KB)Download full-size image