The ability of bacteria to sense environmental cues and adapt is essential for their survival. The use of second-messenger signaling molecules to translate these cues into a physiological response is a common mechanism employed by bacteria. The second messenger 3′–5′-cyclic diadenosine monophosphate (c-di-AMP) has been linked to a diverse set of biological processes involved in maintaining cell viability and homeostasis, as well as pathogenicity. A complex network of both protein and RNA receptors inside the cell activates specific pathways and mediates phenotypic outputs in response to c-di-AMP. Structural analysis of these RNA and protein receptors has revealed the different recognition elements employed by these effectors to bind the same small molecule. Herein, using a series of c-di-AMP analogues, we probed the interactions made with a riboswitch and a phosphodiesterase protein to identify the features important for c-di-AMP binding and recognition. We found that the ydaO riboswitch binds c-di-AMP in two discrete sites with near identical affinity and a Hill coefficient of 1.6. The ydaO riboswitch distinguishes between c-di-AMP and structurally related second messengers by discriminating against an amine at the C2 position more than a carbonyl at the C6 position. We also identified phosphate-modified analogues that bind both the ydaO RNA and GdpP protein with high affinity, whereas symmetrically modified ribose analogues exhibited a substantial decrease in ydaO affinity but retained high affinity for GdpP. These ligand modifications resulted in increased resistance to enzyme-catalyzed hydrolysis by the GdpP enzyme. Together, these data suggest that these c-di-AMP analogues could be useful as chemical tools to specifically target subsections of second-messenger signaling pathways.

Endophytic fungi are plant tissue-associated fungi that represent a rich resource of unexplored biological and chemical diversity. As part of an ongoing effort to characterize Amazon rainforest-derived endophytes, numerous fungi were isolated and cultured from plants collected in the Yasuní National Park in Ecuador. Of these samples, phylogenetic and morphological data revealed a previously undescribed fungus in the order Pleosporales that was cultured from the tropical tree Duroia hirsuta. Extracts from this fungal isolate displayed activity against Staphylococcus aureus and were thus subjected to detailed chemical studies. Two compounds with modest antibacterial activity were isolated, and their structures were elucidated using a combination of NMR spectroscopic analysis, LC-MS studies, and chemical degradation. These efforts led to the identification of stelliosphaerols A (1) and B (2), new sesquiterpene–polyol conjugates that are responsible, at least in part, for the S. aureus inhibitory activity of the fungal extract.

The bacterial toxin RelE is a ribosome-dependent endoribonuclease. It is part of a type II toxin–antitoxin system that contributes to antibiotic resistance and biofilm formation. During amino acid starvation, RelE cleaves mRNA in the ribosomal A-site, globally inhibiting protein translation. RelE is structurally similar to microbial RNases that employ general acid–base catalysis to facilitate RNA cleavage. The RelE active site is atypical for acid–base catalysis, in that it is enriched with positively charged residues and lacks the prototypical histidine-glutamate catalytic pair, making the mechanism of mRNA cleavage unclear. In this study, we use a single-turnover kinetic analysis to measure the effect of pH and phosphorothioate substitution on the rate constant for cleavage of mRNA by wild-type RelE and seven active-site mutants. Mutation and thio effects indicate a major role for stabilization of increased negative change in the transition state by arginine 61. The wild-type RelE cleavage rate constant is pH-independent, but the reaction catalyzed by many of the mutants is strongly dependent on pH, suggestive of general acid–base catalysis. pH–rate curves indicate that wild-type RelE operates with the pKa of at least one catalytic residue significantly downshifted by the local environment. Mutation of any single active-site residue is sufficient to disrupt this microenvironment and revert the shifted pKa back above neutrality. pH–rate curves are consistent with K54 functioning as a general base and R81 as a general acid. The capacity of RelE to effect a large pKa shift and facilitate a common catalytic mechanism by uncommon means furthers our understanding of other atypical enzymatic active sites.

Recent advances in the biological production of fuels have relied on the optimization of pathways involving genes from diverse organisms. Several recent articles have highlighted the potential to expand the pool of useful genes by looking to filamentous fungi. This review highlights the enzymes and organisms used for the production of a variety of fuel types and commodity chemicals with a focus on the usefulness and promise of those from filamentous fungi.

Over a thousand extracts were tested for phenotypic effects in developing zebrafish embryos to identify bioactive molecules produced by endophytic fungi. One extract isolated from Fusarium sp., a widely distributed fungal genus found in soil and often associated with plants, induced an undulated notochord in developing zebrafish embryos. The active compound was isolated and identified as fusaric acid. Previous literature has shown this phenotype to be associated with copper chelation from the active site of lysyl oxidase, but the ability of fusaric acid to bind copper ions has not been well described. Isothermal titration calorimetry revealed that fusaric acid is a modest copper chelator with a binding constant of 4.4 × 105 M−1. These results shed light on the toxicity of fusaric acid and the potential teratogenic effects of consuming plants infected with Fusarium sp.

The toxin RelE is a ribosome-dependent endoribonuclease implicated in diverse cellular processes, including persistence. During amino acid starvation, RelE inhibits translation by cleaving ribosomal A-site mRNA. Although RelE is structurally similar to other microbial endoribonucleases, the active-site amino acid composition differs substantially and lacks obvious candidates for general acid–base functionality. Highly conserved RelE residues (Lys52, Lys54, Arg61, Arg81, and Tyr87) surround the mRNA scissile phosphate, and specific 16S rRNA contacts further contribute to substrate positioning. We used a single-turnover kinetic assay to evaluate the catalytic importance of individual residues in the RelE active site. Within the context of the ribosome, RelE rapidly cleaves A-site mRNA at a rate similar to those of traditional ribonucleases. Single-turnover rate constants decreased between 102- and 106-fold for the RelE active-site mutants of Lys52, Lys54, Arg61, and Arg81. RelE may principally promote catalysis via transition-state charge stabilization and leaving-group protonation, in addition to achieving in-line substrate positioning in cooperation with the ribosome. This kinetic analysis complements structural information to provide a foundation for understanding the molecular mechanism of this atypical endoribonuclease.

The bacterial second messenger signaling molecule bis-(3′-5′)-cyclic dimeric guanosine monophosphate (c-di-GMP) controls important biological processes such as biofilm formation, virulence response, and motility. This second messenger is sensed by macromolecular targets inside the cell, both protein and RNA, which induce specific phenotypic responses critical for bacterial survival. One class of enzymes responsible for regulating the intracellular concentration of c-di-GMP, and therefore the physiological behavior of the cell, consists of the EAL domain phosphodiesterases, which degrade the second messenger to its linear form, pGpG. Here, we investigate how base and backbone modifications of c-di-GMP affect the rate of cyclic dinucleotide degradation by an EAL domain protein (CC3396 from Caulobacter crescentus). The doubly substituted thiophosphate analogue is highly resistant to hydrolysis by this metabolizing enzyme but can still bind c-di-GMP riboswitch targets. We used these findings to develop a novel ribosyl phosphate-modified derivative of c-di-GMP containing 2′-deoxy and methylphosphonate substitutions that is charge neutral and demonstrate that this analogue is also resistant to EAL domain-catalyzed degradation. This suggests a general strategy for designing c-di-GMP derivatives with increased enzymatic stability that also possess desirable properties for development as chemical probes of c-di-GMP signaling.

Fluorine is an abundant element and is toxic to organisms from bacteria to humans, but the mechanisms by which eukaryotes resist fluoride toxicity are unknown. The Escherichia coli gene crcB was recently shown to be regulated by a fluoride-responsive riboswitch, implicating it in fluoride response. There are >8,000 crcB homologs across all domains of life, indicating that it has an important role in biology. Here we demonstrate that eukaryotic homologs [renamed FEX (fluoride exporter)] function in fluoride export. FEX KOs in three eukaryotic model organisms, Neurospora crassa, Saccharomyces cerevisiae, and Candida albicans, are highly sensitized to fluoride (>200-fold) but not to other halides. Some of these KO strains are unable to grow in fluoride concentrations found in tap water. Using the radioactive isotope of fluoride, 18F, we developed an assay to measure the intracellular fluoride concentration and show that the FEX deletion strains accumulate fluoride in excess of the external concentration, providing direct evidence of FEX function in fluoride efflux. In addition, they are more sensitive to lower pH in the presence of fluoride. These results demonstrate that eukaryotic FEX genes encode a previously unrecognized class of fluoride exporter necessary for survival in standard environmental conditions.

Preferential binding of an enzyme to the transition state relative to the ground state is a key strategy for enzyme catalysis. When there is a difference between the ground and transition state charge distributions, enzymes maximize electrostatic interactions to achieve this enhanced transition state binding. Although the transition state is difficult to observe directly by structural methods, the chemical details of this transient species can be characterized by studies of substituent effects (Brønsted, Hammett, Swain–Scott, etc.) and isotope effects. Brønsted analysis can provide an estimate of transition state charges for the nucleophile and leaving group of a reaction. This Account will discuss the theoretical basis of Brønsted analysis and describe its practical application to the study of transacylase enzyme systems including the peptidyl transferase reaction of the ribosome.The Brønsted coefficient is derived from the linear free energy relationship (LFER) that correlates the acidity (pKa) of a reactive atom to the log of its rate constant. The Brønsted coefficient establishes the change in atomic charge as the reaction proceeds from the ground state to the transition state. Bonding events alter the electrostatics of atoms and the extent of bonding can be extrapolated from transition state charges. Therefore, well-defined nucleophile and leaving group transition state charges limit the number of mechanisms that are consistent with a particular transition state. Brønsted results are most informative when interpreted in the context of other mechanistic data, especially for enzymatic studies where an active site may promote a transition state that differs significantly from a prediction based on uncatalyzed solution reactions.Here we review Brønsted analyses performed on transacylases to illustrate how these data enhanced the enzymatic mechanistic studies. Through a systematic comparison of five enzymes, we reveal a wide spectrum of Brønsted values that are possible for what otherwise appear to be similar chemical reactions. The variations in the Brønsted coefficients predict different transition states for the various enzymes. This Account explores an overriding theme in the enzymatic mechanisms that catalysis enhances commensurate bond formation and proton abstraction events. The extent of the two bonding events in relationship to each other can be inferred from the Brønsted coefficient. When viewed in the context of recent ribosomal studies, this interpretation provides mechanistic insights into peptide bond formation.

The ability of bacteria to adapt to a changing environment is essential for their survival. One mechanism used to facilitate behavioral adaptations is the second messenger signaling molecule bis-(3′–5′)-cyclic dimeric guanosine monophosphate (c-di-GMP). c-di-GMP is widespread throughout the bacterial domain and plays a vital role in regulating the transition between the motile planktonic lifestyle and the sessile biofilm forming state. This second messenger also controls the virulence response of pathogenic organisms and is thought to be connected to quorum sensing, the process by which bacteria communicate with each other. The intracellular concentration of c-di-GMP is tightly regulated by the opposing enzymatic activities of diguanlyate cyclases and phosphodiesterases, which synthesize and degrade the second messenger, respectively. The change in the intracellular concentration of c-di-GMP is directly sensed by downstream targets of the second messenger, both protein and RNA, which induce the appropriate phenotypic response. This review will summarize our current state of knowledge of c-di-GMP signaling in bacteria with a focus on protein and RNA binding partners of the second messenger. Efforts towards the synthesis of c-di-GMP and its analogs are discussed as well as studies aimed at targeting these macromolecular effectors with chemically synthesized cyclic dinucleotide analogs.

The cyclic dinucleotide c-di-GMP regulates lifestyle transitions in many bacteria, such as the change from a free motile state to a biofilm-forming community. Riboswitches that bind this second messenger are important downstream targets in this bacterial signaling pathway. The breakdown of c-di-GMP in the cell is accomplished enzymatically and results in the linear dinucleotide pGpG. The c-di-GMP-binding riboswitches must be able to discriminate between their cognate cyclic ligand and linear dinucleotides in order to be selective biological switches. It has been reported that the c-di-GMP-I riboswitch binds c-di-GMP 5 orders of magnitude better than the linear pGpG, but the cause of this large energetic difference in binding is unknown. Here we report binding data and crystal structures of several linear c-di-GMP analogues in complex with the c-di-GMP-I riboswitch. These data reveal the parameters for phosphate recognition and the structural basis of linear dinucleotide binding to the riboswitch. Additionally, the pH dependence of binding shows that exclusion of pGpG is not due to the additional negative charge on the ligand. These data reveal principles that, along with published work, will contribute to the design of c-di-GMP analogues with properties desirable for use as chemical tools and potential therapeutics.

Endophyte Discovery, an IBI Prize–winning module, allows novice scientists to engage in meaningful discovery through inquiry-based research experiences.

The ability of bacteria to adapt to a changing environment is essential for their survival. One mechanism bacteria have evolved to sense environmental cues and translate these signals into phenotypic changes uses the second messenger signaling molecule, cyclic diguanosine monophosphate (c-di-GMP). In addition to several classes of protein receptors, two classes of c-di-GMP-binding riboswitches (class I and class II) have been identified as downstream targets of the second messenger in this signaling pathway. The crystal structures of both riboswitch classes bound to c-di-GMP were previously reported. Here, we further investigate the mechanisms that RNA has evolved for recognition and binding of this second messenger. Using a series of c-di-GMP analogues, we probed the interactions made in the RNA–ligand complex for both classes of riboswitches to identify the most critical elements of c-di-GMP for binding. We found that the structural features of c-di-GMP required for binding differ between these two effectors and that the class II riboswitch is much less discriminatory in ligand binding than the class I riboswitch. These data suggest an explanation for the predicted preferential use of the class I motif over the class II motif in the c-di-GMP signaling pathway.

The glycine riboswitch regulates gene expression through the cooperative recognition of its amino acid ligand by a tandem pair of aptamers. A 3.6 Å crystal structure of the tandem riboswitch from the glycine permease operon of Fusobacterium nucleatum reveals the glycine binding sites and an extensive network of interactions, largely mediated by asymmetric A-minor contacts, that serve to communicate ligand binding status between the aptamers. These interactions provide a structural basis for how the glycine riboswitch cooperatively regulates gene expression.Highlights► The glycine riboswitch uses tandem aptamers to bind a ligand in a cooperative fashion ► This structure of the riboswitch reveals a network of contacts between aptamers ► The interaptamer contacts are symmetrical in nature but differ in their extent ► This model provides a structural basis for cooperative ligand recognition by an RNA

Peptide bond formation during ribosomal protein synthesis involves an aminolysis reaction between the aminoacyl α-amino group and the carbonyl ester of the growing peptide via a transition state with a developing negative charge, the oxyanion. Structural and molecular dynamic studies have suggested that the ribosome may stabilize the oxyanion in the transition state of peptide bond formation via a highly ordered water molecule. To biochemically investigate this mechanistic hypothesis, we estimated the energetic contribution to catalytic charge stabilization of the oxyanion using a series of transition state mimics that contain different charge distributions and hydrogen bond potential on the functional group mimicking the oxyanion. Inhibitors containing an oxyanion mimic that carried a neutral charge and a mimic that preserved the negative charge but could not form hydrogen bonds had less than a 3-fold effect on inhibitor binding affinity. These observations argue that the ribosome provides minimal transition state charge stabilization to the oxyanion during peptide bond formation via the water molecule. This is in contrast to the substantial level of oxyanion stabilization provided by serine proteases. This suggests that the oxyanion may be neutralized via a proton shuttle, resulting in an uncharged transition state.

The glmS riboswitch regulates gene expression through a self-cleavage activity. The reaction is catalyzed with the assistance of the metabolite cofactor glucosamine-6-phosphate (GlcN6P), whose amino group is proposed to serve as the general acid during the reaction. This reaction is pH-dependent with a pKa that is lower than the observed pKa for the amine of GlcN6P in solution. GlcN6P, like other pyranose sugars, undergoes spontaneous and rapid interconversion between the α and β anomers at the C1 position. Here we demonstrate by NMR that the Bacillus anthracis glmS riboswitch selectively binds the α-anomer of GlcN6P with a maximum binding affinity of 0.36 mM and that binding is pH-dependent. We also report that the anomeric ratio between α and β is pH-dependent and the pKas of the two amines differ by 0.5 pH units, α being the higher of the two (pKa = 8.3). The pH dependence of binding reveals a pKa of 6.7, suggesting that the glmS RNA reduces the pKa of the GlcN6P amine by 1.6 units in the ground state. We reevaluated previously obtained kinetic data and found the reaction pKa is 6.9, within error of the binding data. The data support a model where the reaction pKa corresponds to that of the GlcN6P amine. This observation has broader relevance for considering how the microenvironment of an RNA, despite its anionic character, can reduce the pKas of functional groups for use in catalysis.

The bis-(3′-5′)-cyclic dimeric guanosine monophosphate (c-di-GMP) signaling pathway regulates biofilm formation, virulence, and other processes in many bacterial species and is critical for their survival. Two classes of c-di-GMP-binding riboswitches have been discovered that bind this second messenger with high affinity and regulate diverse downstream genes, underscoring the importance of RNA receptors in this pathway. We have solved the structure of a c-di-GMP-II riboswitch, which reveals that the ligand is bound as part of a triplex formed with a pseudoknot. The structure also shows that the guanine bases of c-di-GMP are recognized through noncanonical pairings and that the phosphodiester backbone is not contacted by the RNA. Recognition is quite different from that observed in the c-di-GMP-I riboswitch, demonstrating that at least two independent solutions for RNA second messenger binding have evolved. We exploited these differences to design a c-di-GMP analog that selectively binds the c-di-GMP-II aptamer over the c-di-GMP-I RNA. There are several bacterial species that contain both types of riboswitches, and this approach holds promise as an important tool for targeting one riboswitch, and thus one gene, over another in a selective fashion.

The bacterial second messenger c-di-GMP is used in many species to control essential processes that allow the organism to adapt to its environment. The c-di-GMP riboswitch (GEMM) is an important downstream target in this signaling pathway and alters gene expression in response to changing concentrations of c-di-GMP. The riboswitch selectively recognizes its second messenger ligand primarily through contacts with two critical nucleotides. However, these two nucleotides are not the most highly conserved residues within the riboswitch sequence. Instead, nucleotides that stack with c-di-GMP and that form tertiary RNA contacts are the most invariant. Biochemical and structural evidence reveals that the most common natural variants are able to make alternative pairing interactions with both guanine bases of the ligand. Additionally, a high-resolution (2.3 Å) crystal structure of the native complex reveals that a single metal coordinates the c-di-GMP backbone. Evidence is also provided that after transcription of the first nucleotide on the 3′-side of the P1 helix, which is predicted to be the molecular switch, the aptamer is functional for ligand binding. Although large energetic effects occur when several residues in the RNA are altered, mutations at the most conserved positions, rather than at positions that base pair with c-di-GMP, have the most detrimental effects on binding. Many mutants retain sufficient c-di-GMP affinity for the RNA to remain biologically relevant, which suggests that this motif is quite resilient to mutation.

The hairpin ribozyme accelerates the rate of phosphodiester transfer reactions by at least 5 orders of magnitude. To achieve this rate enhancement, the active site forms via a substrate helix docking event that constrains the scissile phosphate linkage and positions G8 and A38 for catalysis, both of which have been implicated as sites of proton transfer in general acid−base catalysis. To investigate the functional groups required for hairpin activity, we previously reported a series of nucleotide analogue interference mapping experiments [Ryder, S. P., et al. (2001) RNA 7, 1454−1463]. The critical functional groups implicated in those studies were largely consistent with subsequent X-ray crystal structures, but the lack of A38 interference with 8-azaadenosine (n8A), a pKa perturbed nucleotide analogue, argued against functional base ionization at this site. This is inconsistent with a transition state crystal structure and other biochemical studies. To address this discrepancy, we investigated the hairpin ribozyme with an expanded set of pKa perturbed adenosine analogues containing fluorine. A38 was the only site that showed persistent and strong interference with low pKa analogues across a variety of construct/substrate pairs. This interference pattern suggests that A38 base ionization is required for catalytic activity. The lack of n8A interference at A38, in spite of its reduced pKa, likely results from n8A stabilization of the docked state, which requires an unusual syn glycosidic base conformation at A38 for active site assembly. The fluorinated adenosine analogues are better suited to identify sites of functional ionization in systems where structural rearrangements are closely coupled to catalytic steps. All pKa reduced analogues, including those of the previous study, produce selective interference at A38 when substrates are stably bound and docked, consistent with the importance of base ionization at this site.

The ester bond of peptidyl-tRNA undergoes nucleophilic attack in solution and when catalyzed by the ribosome. To characterize the uncatalyzed hydrolysis reaction, a model of peptide release, the transition state structure for hydrolysis of a peptidyl-tRNA mimic was determined. Kinetic isotope effects were measured at several atoms that potentially undergo a change in bonding in the transition state. Large kinetic isotope effects of carbonyl 18O and α-deuterium substitutions on uncatalyzed hydrolysis indicate the transition state is nearly tetrahedral. Kinetic isotope effects were also measured for aminolysis by hydroxylamine to study a reaction similar to the formation of a peptide bond. In contrast to hydrolysis, the large leaving group 18O isotope effect indicates the C−O3′ bond has undergone significant scission in the transition state. The smaller carbonyl 18O and α-deuterium effects are consistent with a later transition state. The assay developed here can also be used to measure isotope effects for the ribosome-catalyzed reactions. These uncatalyzed reactions serve as a basis for determining what aspects of the transition states are stabilized by the ribosome to achieve a rate enhancement.

The glmS ribozyme is the first naturally occurring catalytic RNA that relies on an exogenous, nonnucleotide cofactor for reactivity. From a biochemical perspective, the glmS ribozyme derived from Bacillus anthracis is the best characterized. However, much of the structural work to date has been done on a variant glmS ribozyme, derived from Thermoanaerobacter tengcongensis. Here we present structures of the B. anthracis glmS ribozyme in states before the activating sugar, glucosamine 6-phosphate (GlcN6P), has bound and after the reaction has occurred. These structures show an active site preorganized to bind GlcN6P that retains some affinity for the sugar even after cleavage of the RNA backbone. A structure of an inactive glmS ribozyme with a mutation distal from the ligand-binding pocket highlights a nucleotide critical to the reaction that does not affect GlcN6P binding. Structures of the glmS ribozyme bound to a naturally occurring inhibitor, glucose 6-phosphate (Glc6P), and a nonnatural activating sugar, mannosamine 6-phosphate (MaN6P), reveal a binding mode similar to that of GlcN6P. Kinetic analyses show a pH dependence of ligand binding that is consistent with titration of the cofactor’s phosphate group and support a model in which the major determinant of activity is the sugar amine independent of its stereochemical presentation.

Microbial biodiversity provides an increasingly important source of medically and industrially useful compounds. We have isolated 14 actinomycete species from a collection of approximately 300 plant stem samples from the upper Amazonian rainforest in Peru. All of the cultured isolates produce substances with inhibitory activity directed at a range of potential fungal and bacterial pathogens. For some organisms, this activity is very broad in spectrum while other organisms show specific activity against a limited number of organisms. Two of these organisms preferentially inhibit bacterial test organisms over eukaryotic organisms. rDNA sequence analysis indicates that these organisms are not equivalent to any other cultured deposits in GenBank. Our results provide evidence of the untapped biodiversity in the form of biologically active microbes present within the tissues of higher plants.

The ribosome has an active site comprised of RNA that catalyzes peptide bond formation. To understand how RNA promotes this reaction requires a detailed understanding of the chemical transition state. Here, we report the Brønsted coefficient of the α-amino nucleophile with a series of puromycin derivatives. Both 50S subunit- and 70S ribosome-catalyzed reactions displayed linear free-energy relationships with slopes close to zero under conditions where chemistry is rate limiting. These results indicate that, at the transition state, the nucleophile is neutral in the ribosome-catalyzed reaction, in contrast to the substantial positive charge reported for typical uncatalyzed aminolysis reactions. This suggests that the ribosomal transition state involves deprotonation to a degree commensurate with nitrogen-carbon bond formation. Such a transition state is significantly different from that of uncatalyzed aminolysis reactions in solution.

The ribosomal peptidyl transferase is a biologically essential catalyst responsible for protein synthesis. The reaction is expected to proceed through a transition state approaching tetrahedral geometry with a specific chirality. To establish that stereospecificity, we synthesized two diastereomers of a transition state inhibitor with mimics for each of the four ligands around the reactive chiral center. Preferential binding of the inhibitor that mimics a transition state with S chirality establishes the spatial position of the nascent peptide and the oxyanion and places the amine near the critical A76 2′-OH group on the P-site tRNA. Another inhibitor series with 2′-NH2 and 2′-SH substitutions at the critical 2′-OH group was used to test the neutrality of the 2′-OH group as predicted if the hydroxyl functions as a proton shuttle in the transition state. The lack of significant pH-dependent binding by these inhibitors argues that the 2′-OH group remains neutral in the transition state. Both of these observations are consistent with a proton shuttle mechanism for the peptidyl transferase reaction.

During RNA maturation, the group I intron promotes two sequential phosphorotransfer reactions resulting in exon ligation and intron release. Here, we report the crystal structure of the intron in complex with spliced exons and two additional structures that examine the role of active-site metal ions during the second step of RNA splicing. These structures reveal a relaxed active site, in which direct metal coordination by the exons is lost after ligation, while other tertiary interactions are retained between the exon and the intron. Consistent with these structural observations, kinetic and thermodynamic measurements show that the scissile phosphate makes direct contact with metals in the ground state before exon ligation and in the transition state, but not after exon ligation. Despite no direct exonic interactions and even in the absence of the scissile phosphate, two metal ions remain bound within the active site. Together, these data suggest that release of the ligated exons from the intron is preceded by a change in substrate–metal coordination before tertiary hydrogen bonding contacts to the exons are broken.

The GlmS riboswitch is located in the 5′-untranslated region of the gene encoding glucosamine-6-phosphate (GlcN6P) synthetase. The GlmS riboswitch is a ribozyme with activity triggered by binding of the metabolite GlcN6P. Presented here is the structure of the GlmS ribozyme (2.5 Å resolution) with GlcN6P bound in the active site. The GlmS ribozyme adopts a compact double pseudoknot tertiary structure, with two closely packed helical stacks. Recognition of GlcN6P is achieved through coordination of the phosphate moiety by two hydrated magnesium ions as well as specific nucleobase contacts to the GlcN6P sugar ring. Comparison of this activator bound and the previously published apoenzyme complex supports a model in which GlcN6P does not induce a conformational change in the RNA, as is typical of other riboswitches, but instead functions as a catalytic cofactor for the reaction. This demonstrates that RNA, like protein enzymes, can employ the chemical diversity of small molecules to promote catalytic activity.

The ribosome is the ribonucleoprotein particle responsible for translation of genetic information into proteins. The RNA component of the ribosome has been implicated as the catalytic entity for peptide bond formation based on protease resistance and structural data indicating an all-RNA active site. Nevertheless, peptidyl transfer by ribosomal RNA (rRNA) alone has not been demonstrated. In an attempt to show such activity we generated a minimal construct that comprises much of the 23S rRNA peptidyl transferase center, including the central loop and the A- and P-loops. This minimal rRNA domain was inactive in peptide bond formation under all conditions tested. The RNA was subsequently subjected to six rounds of in vitro selection designed to enrich for this activity. The result was a mutated rRNA sequence that could catalyze the covalent linkage of an A-site and P-site substrate; however, the product did not contain a peptide bond. The current study is an example of an in vitro derived alternate function of rRNA mutants and illustrates the evolutionary possibility that the protoribosome may have used amino acids as substrates before it gained the ability to join them into peptides. Though peptidyl transferase activity in the absence of protein remains elusive, the ease with which alternate catalytic activity was selected from rRNA with a small number of mutations suggests that rRNA may have inherent activity. This study represents a step on the path toward isolating that native activity.

Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5′ and 3′ exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg2+ and K+ ions. Five of the metals bind within 12 Å of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal–RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA–metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.

•Crystal structure of the ligand-bound guanidine-I riboswitch aptamer•Guanidinium recognized via H-bonding, ionic interactions, and cation-π interactions•Unpredicted P3 helix contains binding site and reveals possible switching mechanismThe guanidine-I riboswitch is a conserved RNA element with approximately 2,000 known examples across four phyla of bacteria. It exists upstream of nitrogen metabolism and multidrug resistance transporter genes and alters expression through the specific recognition of a free guanidinium cation. Here we report the structure of a guanidine riboswitch aptamer from Sulfobacillus acidophilus at 2.7 Å resolution. Helices P1, P1a, P1b, and P2 form a coaxial stack that acts as a scaffold for ligand binding. A previously unidentified P3 helix docks into P1a to form the guanidinium binding pocket, which is completely enclosed. Every functional group of the ligand is recognized through hydrogen bonding to guanine bases and phosphate oxygens. Guanidinium binding is further stabilized through cation-π interactions with guanine bases. This allows the riboswitch to recognize guanidinium while excluding other bacterial metabolites with a guanidino group, including the amino acid arginine.Download high-res image (230KB)Download full-size image

The ability of bacteria to adapt to a changing environment is essential for their survival. One mechanism used to facilitate behavioral adaptations is the second messenger signaling molecule bis-(3′–5′)-cyclic dimeric guanosine monophosphate (c-di-GMP). c-di-GMP is widespread throughout the bacterial domain and plays a vital role in regulating the transition between the motile planktonic lifestyle and the sessile biofilm forming state. This second messenger also controls the virulence response of pathogenic organisms and is thought to be connected to quorum sensing, the process by which bacteria communicate with each other. The intracellular concentration of c-di-GMP is tightly regulated by the opposing enzymatic activities of diguanlyate cyclases and phosphodiesterases, which synthesize and degrade the second messenger, respectively. The change in the intracellular concentration of c-di-GMP is directly sensed by downstream targets of the second messenger, both protein and RNA, which induce the appropriate phenotypic response. This review will summarize our current state of knowledge of c-di-GMP signaling in bacteria with a focus on protein and RNA binding partners of the second messenger. Efforts towards the synthesis of c-di-GMP and its analogs are discussed as well as studies aimed at targeting these macromolecular effectors with chemically synthesized cyclic dinucleotide analogs.