•We test the frequency dependence of the ME charge coefficients and the noise floor of the sensor.•We examine the ability to reject vibrational noises.•Giant ME effect has been found, the ME voltage coefficient reaches 890 pC/Oe at low frequencies with a low noise floor of 32 pT/Hz1/2 at 1 Hz, which was very close to the estimated value (27 pT/Hz1/2).•The results show an excellent ability to attenuate the vibrational noise by 91%.Giant ME effects in laminates have been investigated for highly sensitive low frequency magnetic field sensors. It has been shown in recent years that one of the biggest obstacles for magnetoelectric (ME) sensors achieving high sensitivity at low frequency is the vibrational noise introduced via piezoelectric effect.This work demonstrates a novel differential technique which has the ability to reject the vibrational noise in a multilayer structured ME sensor. It exhibits an excellent ME effect with a low equivalent magnetic noise floor of 32 pT/Hz1/2 at 1 Hz and 3 pT/Hz1/2 at 10 Hz, which was very close to the predicted value (27 pT/Hz1/2 at 1 Hz and 2.9 pT/Hz1/2 at 10 Hz). With respect to the ability to reject the vibrational noise, the external vibrational noise was incredibly attenuated by 91%. These unique properties of the multilayer structured sensor offer potential applications as a precise and sensitive magnetic field detector.

In order to improve the flexibility of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 (PIMNT) single crystal and make full use of the ultrahigh piezoelectric property in focused ultrasonic transducers, PIMNT/epoxy 1-3 composite with a volume fraction of 60% was prepared by a modified dice-and-fill method. Excellent properties for ultrasonic transducer applications have been achieved, such as higher thickness electromechanical coupling coefficient (kt = 84%), lower acoustic impedance (Z = 19 MRayls), and moderate dielectric constant (ε33T/ε0=2040). Based on the improved flexibility of as-prepared PIMNT/epoxy 1-3 composite, a cylindrically shaped ultrasonic linear array has been designed, fabricated, and characterized. The cylindrically shaped ultrasonic linear array has achieved an ultra-broad bandwidth (−6 dB) of 128%, which is a significant improvement over the plane linear array. These promising results show that the PIMNT/epoxy 1-3 composite can be used to develop high-performance focused ultrasonic transducers.