Iron-catalyzed cross-coupling reactions using alkynyl nucleophiles represent an attractive approach for the incorporation of alkynyl moieties into organic molecules. In the present study, a multitechnique approach combining inorganic spectroscopic methods, inorganic synthesis, and reaction studies is applied to iron-SciOPP catalyzed alkynyl-alkyl cross-couplings, providing the first detailed insight into the effects of variation from sp2- to sp-hybridized nucleophiles on iron speciation and reactivity. Reaction studies demonstrate that reaction of FeBr2(SciOPP) with 1 equiv (triisopropylsilyl)ethynylmagnesium bromide (TIPS-CC-MgBr) leads to a distribution of mono-, bis-, and tris-alkynylated iron(II)-SciOPP species due to rapid alkynyl ligand redistribution. While solvents such as THF promote these complex redistribution pathways, nonpolar solvents such as toluene enable increased stabilization of these iron species and further enabled assessment of their reactivity with electrophile. While the tris-alkynylated iron(II)-SciOPP species was found to be unreactive with the cycloheptyl bromide electrophile over the average turnover time of catalysis, the in situ formed neutral mono- and bis-alkynylated iron(II)-SciOPP complexes are consumed upon reaction with the electrophile with concomitant generation of cross-coupled product at catalytically relevant rates, indicating the ability of one or both of these species to react selectively with the electrophile. The nature of the reaction solvent and Grignard reagent addition rate were found to have broader implications in overall reaction selectivity, reaction rate, and accessibility of off-cycle iron(I)-SciOPP species. Additionally, the effects of steric substitution of the alkynyl Grignard reagent on catalytic performance were investigated. Fundamental insight into iron speciation and reactivity with alkynyl nucleophiles reported herein provides an essential foundation for the continued development of this important class of reactions.

Nonprecious metal M–N–C (M = Fe or Co) catalysts that are effective for the oxygen-reduction reaction in polymer-electrolyte fuel cells have been developed, but no consensus has yet been reached regarding the nature of the M sites in these heterogeneous catalysts that are responsible for the reaction with dioxygen (O2). While multiple studies have developed correlations between Fe distributions in as-prepared catalysts and ORR activity, the direct identification of sites reactive toward O2 or O2-analogue molecules remains a significant challenge. In the present study, we demonstrate a new approach to identifying and characterizing potential Fe active sites in complex ORR catalysts that combines an effective probe molecule (NO(g)), Mössbauer spectroscopy, and nuclear resonance vibrational spectroscopy (NRVS) with density functional theory (DFT) calculations. Mössbauer spectroscopic studies demonstrate that NO(g) treatment of electrochemically reduced PANI–57Fe–C leads to a selective reaction with only a subset of the Fe species present. Nuclear resonance vibrational spectroscopic studies identified new Fe–ligand vibrations associated with the site reactive toward NO(g). DFT calculations of the vibrational properties of a selection of previously proposed active-site structures suggest that graphene zigzag edge-hosted Fe–N structures may be responsible for the observed vibrational behavior with NO(g) probe molecules. Furthermore, such sites are likely also reactive to O2, possibly serving as the ORR active sites in the synthesized materials.

The combination of simple cobalt salts and N-heterocyclic carbene (NHC) ligands has been highly effective in C–H functionalization, hydroarylation and cross-coupling catalysis, though displaying a strong dependence on the identity of the NHC ligand. In addition, reactions effective with NHC ligands are often ineffective with phosphine ligands, further motivating the evaluation of the fundamental electronic structure and bonding differences in well-defined distorted tetrahedral Co(II) complexes. Magnetic circular dichroism (MCD) studies indicate that Co(II)–bisphosphines have larger ligand fields than Co(II)–NHC complexes. Theoretical density functional theory (DFT) calculations were performed on an expanded set of L2CoCl2 complexes (L2 = NHC, bisphosphine and diamine) to study the electronic structure and relative ligation properties of NHCs compared to bisphosphine and diamine ligands. Mayer bond order and charge decomposition analyses indicate that NHC ligands are slightly stronger donor ligands than bisphosphines but also result in a weakening of Co–Cl bonds in a trans-like influence. From MCD and DFT studies, changing the NHC N-substituent has a larger effect on the ligand field of Co(II)–NHC complexes than saturating the backbone. Overall, these studies provide detailed insight into the electronic structure and bonding effects in Co(II) complexes with ligand types commonly explored in catalysis.

We present a combined ab initio theoretical and experimental study of the magnetic circular dichroism (MCD) spectrum of the octahedral UCl6− complex ion in the UV-Vis spectral region. The ground state is an orbitally non-degenerate doublet E5/2u and the MCD is a -term spectrum caused by spin–orbit coupling. Calculations of the electronic spectrum at various levels of theory indicate that differential dynamic electron correlation has a strong influence on the energies of the dipole-allowed transitions and the envelope of the MCD spectrum. The experimentally observed bands are assigned to dipole-allowed ligand-to-metal charge transfer into the 5f shell, and 5f to 6d transitions. Charge transfer excitations into the U 6d shell appear at much higher energies. The MCD-allowed transitions can be assigned via their signs of the -terms: Under Oh double group symmetry, E5/2u → E5/2g transitions have negative -terms whereas E5/2u → F3/2g transitions have positive -terms if the ground state g-factor is negative, as it is the case for UCl6−.

Calprotectin (CP) is an abundant metal-chelating protein involved in host defense, and the ability of human CP to bind Fe(II) in a calcium-dependent manner was recently discovered. In the present study, near-infrared magnetic circular dichroism spectroscopy is employed to investigate the nature of Fe(II) coordination at the two transition-metal-binding sites of CP that are a His3Asp motif (site 1) and a His6 motif (site 2). Upon the addition of sub-stoichiometric Fe(II), a six-coordinate (6C) Fe(II) center associated with site 2 is preferentially formed in the presence of excess Ca(II). This site exhibits an exceptionally large ligand field (10Dq = 11 045 cm−1) for a non-heme Fe(II) protein. Analysis of CP variants lacking residues of the His6 motif supports that CP coordinates Fe(II) at site 2 by employing six His ligands. In the presence of greater than one equiv. of Fe(II) or upon mutation of the His6 motif, the metal ion also binds at site 1 of CP to form a five-coordinate (5C) Fe(II)–His3Asp motif that was previously unidentified in this system. Notably, the introduction of His-to-Ala mutations at the His6 motif results in a mixture of 6C (site 2) and 5C (site 1) signals in the presence of sub-stoichiometric Fe(II). These results are consistent with a reduced Fe(II)-binding affinity of site 2 as more weakly coordinating water-derived ligands complete the 6C site. In the absence of Ca(II), both sites 1 and 2 are occupied upon addition of sub-stoichiometric Fe(II), and a stronger ligand field is observed for the 5C site. These spectroscopic studies provide further evaluation of a unique non-heme Fe(II)–His6 site for metalloproteins and support the notion that Ca(II) ions influence the Fe(II)-binding properties of CP.

Iron-catalyzed cross-couplings with simple ferric salts have been known since the 1970s, pioneered by Kochi for cross-coupling using alkylmagnesium nucleophiles including MeMgBr. While Kochi observed the formation of a S = 1/2 iron species in reactions of simple ferric salts with MeMgBr proposed to be an iron(I) species, the identity of this species has remained undefined for nearly 40 years. Herein, we report the isolation and characterization of [MgCl(THF)5][Fe8Me12], which combined with EPR and MCD studies is shown to be consistent with Kochi’s S = 1/2 species. Reaction studies with β-bromostyrene demonstrate that this species alone displays minimal reactivity but, when combined with additional MeMgBr, leads to rapid and selective formation of cross-coupled product.

Chelating phosphines are effective additives and supporting ligands for a wide array of iron-catalyzed cross-coupling reactions. While recent studies have begun to unravel the nature of the in situ-formed iron species in several of these reactions, including the identification of the active iron species, insight into the origin of the differential effectiveness of bisphosphine ligands in catalysis as a function of their backbone and peripheral steric structures remains elusive. Herein, we report a spectroscopic and computational investigation of well-defined FeCl2(bisphosphine) complexes (bisphosphine = SciOPP, dpbz, tBudppe, or Xantphos) and known iron(I) variants to systematically discern the relative effects of bisphosphine backbone character and steric substitution on the overall electronic structure and bonding within their iron complexes across oxidation states implicated to be relevant in catalysis. Magnetic circular dichroism (MCD) and density functional theory (DFT) studies demonstrate that common o-phenylene and saturated ethyl backbone motifs result in small but non-negligible perturbations to 10Dq(Td) and iron–bisphosphine bonding character at the iron(II) level within isostructural tetrahedra as well as in five-coordinate iron(I) complexes FeCl(dpbz)2 and FeCl(dppe)2. Notably, coordination of Xantphos to FeCl2 results in a ligand field significantly reduced relative to those of its iron(II) partners, where a large bite angle and consequent reduced iron–phosphorus Mayer bond orders (MBOs) could play a role in fostering the unique ability of Xantphos to be an effective additive in Kumada and Suzuki–Miyaura alkyl–alkyl cross-couplings. Furthermore, it has been found that the peripheral steric bulk of the SciOPP ligand does little to perturb the electronic structure of FeCl2(SciOPP) relative to that of the analogous FeCl2(dpbz) complex, potentially suggesting that differences in the steric properties of these ligands might be more important in determining in situ iron speciation and reactivity.

Iron complexes containing pincer ligands that incorporate N-heterocyclic carbene (NHC) moieties are of significant interest in organometallic catalysis in order to generate more oxidatively robust complexes that may exhibit novel catalytic properties. In order to define the effect that introducing NHC moieties into pincer ligands has on electronic structure and bonding in iron(II)-pincer complexes, MCD and DFT studies of (iPrCDA)FeBr2, (iPrPDI)FeBr2, and (iPrCNC)FeBr2 were performed. These studies quantify the electronic structures and bonding interactions as a function of pincer ligand variation. They also demonstrate that the observed ligand fields (and, hence, spin states) directly correlate to the increased Fe–C bonding and pincer-donating abilities that result from introducing NHC moieties into the pincer ligand. However, the net donor abilities of the pincers and the strength of the Fe-pincer interaction do not directly correlate to the number of NHC moieties present, but instead are determined to be due to differences in Fe–C and overall Fe-pincer bonding as a result of the position of the NHC moieties in the pincer ligand and the overall geometric constraints of the pincer architecture.

While previous studies have identified FeMes2(SciOPP) as the active catalyst species in iron–SciOPP catalyzed Kumada cross-coupling of mesitylmagnesium bromide and primary alkyl halides, the active catalyst species in cross-couplings with phenyl nucleophiles, where low valent iron species might be prevalent due to accessible reductive elimination pathways, remains undefined. In the present study, in situ Mössbauer and magnetic circular dichroism spectroscopic studies combined with inorganic syntheses and reaction studies are employed to evaluate the in situ formed iron species and identify the active catalytic species in iron–SciOPP catalyzed Suzuki–Miyaura and Kumada cross-couplings of phenyl nucleophiles and secondary alkyl halides. While reductive elimination to form Fe(η6-biphenyl)(SciOPP) occurs upon reaction of FeCl2(SciOPP) with phenyl nucleophiles, this iron(0) species is not found to be kinetically competent for catalysis. Importantly, mono- and bis-phenylated iron(II)–SciOPP species that form prior to reductive elimination are identified, where both species are found to be reactive toward electrophile at catalytically relevant rates. The higher selectivity toward the formation of cross-coupled product observed for the monophenylated species combined with the undertransmetalated nature of the in situ iron species in both Kumada and Suzuki–Miyaura reactions indicates that Fe(Ph)X(SciOPP) (X = Br, Cl) is the predominant reactive species in cross-coupling. Overall, these studies demonstrate that low-valent iron is not required for the generation of highly reactive species for effective aryl-alkyl cross-couplings.

Iron salts and N-heterocyclic carbene (NHC) ligands is a highly effective combination in catalysis, with observed catalytic activities being highly dependent on the nature of the NHC ligand. Detailed spectroscopic and electronic structure studies have been performed on both three- and four-coordinate iron(II)–NHC complexes using a combined magnetic circular dichroism (MCD) and density functional theory (DFT) approach that provide detailed insight into the relative ligation properties of NHCs compared to traditional phosphine and amine ligands as well as the effects of NHC backbone structural variations on iron(II)–NHC bonding. Near-infrared MCD studies indicate that 10Dq(Td) for (NHC)2FeCl2 complexes is intermediate between those for comparable amine and phosphine complexes, demonstrating that such iron(II)–NHC and iron(II)–phosphine complexes are not simply analogues of one another. Theoretical studies including charge decomposition analysis indicate that the NHC ligands are slightly stronger donor ligands than phosphines but also result in significant weakening of the Fe–Cl bonds compared to phosphine and amine ligands. The net result is significant differences in the d orbital energies in four-coordinate (NHC)2FeCl2 complexes relative to the comparable phosphine complexes, where such electronic structure differences are likely a significant contributing factor to the differing catalytic performances observed with these ligands. Furthermore, Mössbauer, MCD and DFT studies of the effects of NHC backbone structure variations (i.e. saturated, unsaturated, chlorinated) on iron–NHC bonding and electronic structure in both three- and four-coordinate iron(II)–NHC complexes indicate only small differences as a function of backbone structure, that are likely amplified at lower oxidation states of iron due to the resulting decrease in the energy separation between the occupied iron d orbitals and the unoccupied NHC π* orbitals.

Herein we present a series of new α-iminopyridine-based iron-PNN pincer complexes [FeBr2LPNN] (1), [Fe(CO)2LPNN] (2), [Fe(CO)2LPNN](BF4) (3), [Fe(F)(CO)2LPNN](BF4) (4), and [Fe(H)(CO)2LPNN](BF4) (5) with formal oxidation states ranging from Fe(0) to Fe(II) (LPNN = 2-[(di-tert-butylphosphino)methyl]-6-[1-(2,4,6-mesitylimino)ethyl]pyridine). The complexes were characterized by a variety of methods including 1H, 13C, 15N, and 31P NMR, IR, Mössbauer, and X-ray photoelectron spectroscopy (XPS) as well as electron paramagnetic resonance (EPR) and magnetic circular dichroism (MCD) spectroscopy, SQUID magnetometry, and X-ray crystallography, focusing on the assignment of the metal oxidation states. Ligand structural features suggest that the α-iminopyridine ligand behaves as a redox non-innocent ligand in some of these complexes, particularly in [Fe(CO)2LPNN] (2), in which it appears to adopt the monoanionic form. In addition, the NMR spectroscopic features (13C, 15N) indicate the accumulation of charge density on parts of the ligand for 2. However, a combination of spectroscopic measurements that more directly probe the iron oxidation state (e.g., XPS), density functional theory (DFT) calculations, and electronic absorption studies combined with time-dependent DFT calculations support the description of the metal atom in 2 as Fe(0). We conclude from our studies that ligand structural features, while useful in many assignments of ligand redox non-innocence, may not always accurately reflect the ligand charge state and, hence, the metal oxidation state. For complex 2, the ligand structural changes are interpreted in terms of strong back-donation from the metal center to the ligand as opposed to electron transfer.

While iron-bisphosphines have emerged as effective catalysts for C–C cross-coupling, the nature of the in situ formed iron species, elucidation of the active catalysts and the mechanisms of catalysis have remained elusive. A combination of 57Fe Mössbauer and magnetic circular dichroism (MCD) spectroscopies of well-defined and in situ formed mesityl-iron(II)-SciOPP species combined with density functional theory (DFT) investigations provides the first direct insight into electronic structure, bonding and in situ speciation of mesityl-iron(II)-bisphosphines in the Kumada cross-coupling of MesMgBr and primary alkyl halides using FeCl2(SciOPP). Combined with freeze-trapped solution Mössbauer studies of reactions with primary alkyl halides, these studies demonstrate that distorted square-planar FeMes2(SciOPP) is the active catalyst for cross-coupling and provide insight into the molecular-level mechanism of catalysis. These studies also define the effects of key reaction protocol details, including the role of the slow Grignard addition method and the addition of excess SciOPP ligand, in leading to high product yields and selectivities.

While iron-catalyzed Kumada cross-coupling reactions with simple iron salts have been known since the early 1970s, the nature of the in situ-formed iron species remains elusive. Herein, we report the synthesis of the homoleptic tetralkyliron(III) ferrate complex [MgCl(THF)5][FeMe4] from the reaction of FeCl3 with MeMgBr in THF. Upon warming, this distorted square-planar S = 3/2 species converts to the S = 1/2 species originally observed by Kochi and co-workers with concomitant formation of ethane, consistent with its intermediacy in the reduction pathway of FeCl3 to generate the reduced iron species involved in catalysis.

Transition metal complexes supported by pincer ligands have many important applications. Here, the syntheses of five-coordinate PNP pincer-supported Fe complexes of the type (PNP)FeCl2 (PNP = HN{CH2CH2(PR2)}2, R = iPr (iPrPNP), tBu (tBuPNP), or cyclohexyl (CyPNP)) are reported. In the solid state, (iPrPNP)FeCl2 was characterized in two different geometries by X-ray crystallography. In one form, the iPrPNP ligand binds to the Fe center in the typical meridional geometry for a pincer ligand, whereas in the other form, the iPrPNP ligand binds in a facial geometry. The electronic structures and geometries of all of the (PNP)FeCl2 complexes were further explored using 57Fe Mössbauer and magnetic circular dichroism spectroscopy. These measurements show that in some cases two isomers of the (PNP)FeCl2 complexes are present in solution and conclusively demonstrate that binding of the PNP ligand is flexible, which may have implications for the reactivity of this important class of compounds.

The presence of covalency in complexes of the 4f and 5f elements has been a source of intense research and controversy. In addition to academic interest in this debate, there is an industrial motivation for better understanding of bonding in f-element complexes due to the need to separate trivalent trans-plutonium elements from trivalent lanthanide fission products in advanced nuclear fuel cycles. This review discusses the key evidence for covalency in f-element bonds derived from structural, spectroscopic and theoretical studies of some selected classes of molecules, including octahedral hexahalides, linear actinyl and organometallic sandwich complexes. This evidence is supplemented by a discussion of covalency, including the possibility of both overlap and near-degeneracy driven covalency and the need to quantify their relative contributions in actinide metal–ligand bonds.Highlights► Extensive experimental evidence exists for covalency in f-element complexes. ► 5f and 6d as well as pseudo-core 6s and 6p orbitals can contribute to bonding in light actinides. ► Both overlap and near-degeneracy driven covalency may be operative for different classes of complexes.

DNA-templated silver nanoclusters are promising biological fluorescence probes due to their useful fluorescence properties, including tunability of emission wavelength through DNA template sequence variations. Ag K-edge EXAFS analysis of DNA-templated silver nanoclusters has been used to obtain insight into silver nanocluster bonding, size, and structural correlations to fluorescence. The results indicate the presence of small silver nanoclusters (<30 silver atoms) containing Ag–Ag bonds and Ag–N/O ligations to DNA. The DNA sequence used leads to differences in silver–DNA ligation as well as silver nanocluster size. The results support a model in which cooperative effects of both Ag–DNA ligation and variations in cluster size lead to the tuning of the fluorescence emission of DNA-templated silver nanoclusters.

Calprotectin (CP) is an abundant metal-chelating protein involved in host defense, and the ability of human CP to bind Fe(II) in a calcium-dependent manner was recently discovered. In the present study, near-infrared magnetic circular dichroism spectroscopy is employed to investigate the nature of Fe(II) coordination at the two transition-metal-binding sites of CP that are a His3Asp motif (site 1) and a His6 motif (site 2). Upon the addition of sub-stoichiometric Fe(II), a six-coordinate (6C) Fe(II) center associated with site 2 is preferentially formed in the presence of excess Ca(II). This site exhibits an exceptionally large ligand field (10Dq = 11045 cm−1) for a non-heme Fe(II) protein. Analysis of CP variants lacking residues of the His6 motif supports that CP coordinates Fe(II) at site 2 by employing six His ligands. In the presence of greater than one equiv. of Fe(II) or upon mutation of the His6 motif, the metal ion also binds at site 1 of CP to form a five-coordinate (5C) Fe(II)–His3Asp motif that was previously unidentified in this system. Notably, the introduction of His-to-Ala mutations at the His6 motif results in a mixture of 6C (site 2) and 5C (site 1) signals in the presence of sub-stoichiometric Fe(II). These results are consistent with a reduced Fe(II)-binding affinity of site 2 as more weakly coordinating water-derived ligands complete the 6C site. In the absence of Ca(II), both sites 1 and 2 are occupied upon addition of sub-stoichiometric Fe(II), and a stronger ligand field is observed for the 5C site. These spectroscopic studies provide further evaluation of a unique non-heme Fe(II)–His6 site for metalloproteins and support the notion that Ca(II) ions influence the Fe(II)-binding properties of CP.

Iron salts and N-heterocyclic carbene (NHC) ligands is a highly effective combination in catalysis, with observed catalytic activities being highly dependent on the nature of the NHC ligand. Detailed spectroscopic and electronic structure studies have been performed on both three- and four-coordinate iron(II)–NHC complexes using a combined magnetic circular dichroism (MCD) and density functional theory (DFT) approach that provide detailed insight into the relative ligation properties of NHCs compared to traditional phosphine and amine ligands as well as the effects of NHC backbone structural variations on iron(II)–NHC bonding. Near-infrared MCD studies indicate that 10Dq(Td) for (NHC)2FeCl2 complexes is intermediate between those for comparable amine and phosphine complexes, demonstrating that such iron(II)–NHC and iron(II)–phosphine complexes are not simply analogues of one another. Theoretical studies including charge decomposition analysis indicate that the NHC ligands are slightly stronger donor ligands than phosphines but also result in significant weakening of the Fe–Cl bonds compared to phosphine and amine ligands. The net result is significant differences in the d orbital energies in four-coordinate (NHC)2FeCl2 complexes relative to the comparable phosphine complexes, where such electronic structure differences are likely a significant contributing factor to the differing catalytic performances observed with these ligands. Furthermore, Mössbauer, MCD and DFT studies of the effects of NHC backbone structure variations (i.e. saturated, unsaturated, chlorinated) on iron–NHC bonding and electronic structure in both three- and four-coordinate iron(II)–NHC complexes indicate only small differences as a function of backbone structure, that are likely amplified at lower oxidation states of iron due to the resulting decrease in the energy separation between the occupied iron d orbitals and the unoccupied NHC π* orbitals.

We present a combined ab initio theoretical and experimental study of the magnetic circular dichroism (MCD) spectrum of the octahedral UCl6− complex ion in the UV-Vis spectral region. The ground state is an orbitally non-degenerate doublet E5/2u and the MCD is a -term spectrum caused by spin–orbit coupling. Calculations of the electronic spectrum at various levels of theory indicate that differential dynamic electron correlation has a strong influence on the energies of the dipole-allowed transitions and the envelope of the MCD spectrum. The experimentally observed bands are assigned to dipole-allowed ligand-to-metal charge transfer into the 5f shell, and 5f to 6d transitions. Charge transfer excitations into the U 6d shell appear at much higher energies. The MCD-allowed transitions can be assigned via their signs of the -terms: Under Oh double group symmetry, E5/2u → E5/2g transitions have negative -terms whereas E5/2u → F3/2g transitions have positive -terms if the ground state g-factor is negative, as it is the case for UCl6−.