Electrochemical behaviors of Prussian blue (PB) have been intensively studied for decades because it not only serves as a model electro-active nanomaterial in fundamental electrochemistry but also a promising metal-ion storage electrode material for developing rechargeable batteries. Traditional electrochemical studies are mostly based on bulk materials, leading to an averaged property of billions of PB nanoparticles. In the present work, we employed surface plasmon resonance microscopy (SPRM) to resolve the optical cyclic voltammograms of single PB nanoparticles during electrochemical cycling. It was found that the electrochemical behavior of single PB nanoparticles nicely followed a classical thin-film electrochemistry theory. While kinetic controlled electron transfer was observed at slower scan rates, intraparticle diffusion of K+ ions began to take effect when the scan rate was higher than 60 mV/s. We further found that the electrochemical activity among individual PB nanoparticles was very heterogeneous and such a phenomenon has not been previously observed in the bulk measurements. The present work not only demonstrates the thin-film electrochemical feature of single electro-active nanomaterials for the first time, it also validates the applicability of SPRM technique to investigate a variety of metal ion-storage battery materials, with implications in both fundamental nanoelectrochemistry and electro-active materials for sensing and battery applications.

Single nanoparticle collisions have become popular for studying the electrochemical activity of single nanoparticles by determining the transient current during stochastic collisions with the electrode surface. However, if only the electrochemical current is measured, it remains challenging to identify and characterize the individual particle that is responsible for a specific current peak in a collision event; this hampers the understanding of the structure–activity relationship. Herein, we report simultaneous optical and electrochemical recording of a single nanoparticle collision; the electrochemical signal corresponds with the activity of a single nanoparticle, and the optical signal reveals the size and location of the same nanoparticle. Consequently, the structure (optical signal)–activity (electrochemical signal) relationship can be elucidated at the single nanoparticle level; this has implications for various applications including batteries, electrocatalysts, and electrochemical sensors. In addition, our previous studies have suggested an optical-to-electrochemical conversion model to independently calculate the electron transfer rate of single nanoparticles from the optical signal. The simultaneous optical and electrochemical recording achieved in the present work enables direct and quantitative validation of the optical-to-electrochemical conversion model.

Semiconductor photocatalysis holds promising keys to address various energy and environmental challenges. Most studies to date are based on ensemble analysis, which may mask critical photocatalytic kinetics in single nanocatalysts. Here we report a study of imaging photocatalytic hydrogen production of single CdS nanoparticles with a plasmonic microscopy in an in operando manner. Surprisingly, we find that the photocatalytic reaction switches on and off stochastically despite the fact that the illumination is kept constant. The on and off states follow truncated and full-scale power-law distributions in broad time scales spanning 3–4 orders of magnitude, respectively, which can be described with a statistical model involving stochastic reactions rates at multiple active sites. This phenomenon is analogous to fluorescence photoblinking, but the underlying mechanism is different. As individual nanocatalyst represents the elementary photocatalytic platform, the discovery of the intermittent nature of the photocatalysis provides insights into the fundamental photochemistry and photophysics of semiconductor nanomaterials, which is anticipated to substantially benefit broad application fields such as clean energy, pollution treatment, and chemical synthesis.

Bidirectional electron transfer crossing the metal/semiconductor interface regulates the light absorption and carrier separation efficiency of plasmonic-semiconductor hybrid nanomaterials. Existing studies have been largely focused on a localized surface plasmon resonance (LSPR) effect contributed by an ensemble of metal nanomaterials. Herein, we constructed a Schottky junction that consisted of single CdS nanoparticles and a planar gold film, and investigated hot electrons excited by the surface plasmon polaritons (SPPs) propagating in the gold film. When illuminating the interface with blue light, photoinduced electrons were found to inject from the CdS nanoparticle to the gold film. In a reverse process, SPPs were generated on shining a red beam into the gold film via a Kretschmann configuration, resulting in the injection of hot electrons into CdS nanoparticles. A recently developed plasmonic microscopy method was employed to monitor the entire process, providing the ability to image a single nanoparticle to visualize the bidirectional electron transfer dynamics in a Schottky junction involving propagating SPPs. The present study advances the understanding of the mechanism of hot electron transfer, which is anticipated to aid in the rational design and optimization of plasmonic-semiconductor hybrid nanomaterials with broad applications in photocatalysis, photovoltaic devices, and photoelectrochemical sensing.

•An optical microscopy that can quantify the refractive index of single nanoparticles.•Measuring electrochemical voltammetry and chronoamperometry of single nanoparticles.•Correlating structure and electrochemical activity of individual electroactive nanoparticles.•Studying electroactive nanomaterials for batteries and electrocatalysis applications.Surface plasmon resonance microscopy (SPRM) is an emerging label-free optical microscopic imaging technology. It utilizes the planar surface plasmon resonance effect to visualize the optical mass of individual nano-objects. On the basis of appropriate optical-to-electrochemical conversion models, electrochemical current associated with individual nanoparticles can be quantitatively resolved from SPRM images recorded during electrochemical reactions, allowing for cyclic voltammetry and chronoamperometry analysis at single nanoparticle level. More importantly, the spatial resolution of SPRM further enables us to investigate the structure–activity relationship in a bottom-up manner by correlating the structure (from electron microscopes) and the electrochemical activity (from SPRM) of the very same individuals. In this mini-review, we summarize our recent work on using SPRM to study the electrochemical activities of single nanoparticles, and provide our opinions on the challenges and future research directions in this field.Download high-res image (106KB)Download full-size image

Electrochemical reactions are involved in many natural phenomena, and are responsible for various applications, including energy conversion and storage, material processing and protection, and chemical detection and analysis. An electrochemical reaction is accompanied by electron transfer between a chemical species and an electrode. For this reason, it has been studied by measuring current, charge, or related electrical quantities. This approach has led to the development of various electrochemical methods, which have played an essential role in the understanding and applications of electrochemistry. While powerful, most of the traditional methods lack spatial and temporal resolutions desired for studying heterogeneous electrochemical reactions on electrode surfaces and in nanoscale materials. To overcome the limitations, scanning probe microscopes have been invented to map local electrochemical reactions with nanometer resolution. Examples include the scanning electrochemical microscope and scanning electrochemical cell microscope, which directly image local electrochemical reaction current using a scanning electrode or pipet. The use of a scanning probe in these microscopes provides high spatial resolution, but at the expense of temporal resolution and throughput.This Account discusses an alternative approach to study electrochemical reactions. Instead of measuring electron transfer electrically, it detects the accompanying changes in the reactant and product concentrations on the electrode surface optically via surface plasmon resonance (SPR). SPR is highly surface sensitive, and it provides quantitative information on the surface concentrations of reactants and products vs time and electrode potential, from which local reaction kinetics can be analyzed and quantified. The plasmonic approach allows imaging of local electrochemical reactions with high temporal resolution and sensitivity, making it attractive for studying electrochemical reactions in biological systems and nanoscale materials with high throughput.The plasmonic approach has two imaging modes: electrochemical current imaging and interfacial impedance imaging. The former images local electrochemical current associated with electrochemical reactions (faradic current), and the latter maps local interfacial impedance, including nonfaradic contributions (e.g., double layer charging). The plasmonic imaging technique can perform voltammetry (cyclic or square wave) in an analogous manner to the traditional electrochemical methods. It can also be integrated with bright field, dark field, and fluorescence imaging capabilities in one optical setup to provide additional capabilities. To date the plasmonic imaging technique has found various applications, including mapping of heterogeneous surface reactions, analysis of trace substances, detection of catalytic reactions, and measurement of graphene quantum capacitance. The plasmonic and other emerging optical imaging techniques (e.g., dark field and fluorescence microscopy), together with the scanning probe-based electrochemical imaging and single nanoparticle analysis techniques, provide new capabilities for one to study single nanoparticle electrochemistry with unprecedented spatial and temporal resolutions. In this Account, we focus on imaging of electrochemical reactions at single nanoparticles.

Understanding the phase transition and Li-ion diffusion kinetics of Li-ion storage nanomaterials holds promising keys to further improve the cycle life and charge rate of the Li-ion battery. Traditional electrochemical studies were often based on a bulk electrode consisting of billions of electroactive nanoparticles, which washed out the intrinsic heterogeneity among individuals. Here, we employ optical microscopy, termed surface plasmon resonance microscopy (SPRM), to image electrochemical current of single LiCoO2 nanoparticles down to 50 fA during electrochemical cycling, from which the phase transition and Li-ion diffusion kinetics can be quantitatively resolved in a single nanoparticle, in operando and high throughput manner. SPRM maps the refractive index (RI) of single LiCoO2 nanoparticles, which significantly decreases with the gradual extraction of Li-ions, enabling the optical read-out of single nanoparticle electrochemistry. Further scanning electron microscopy characterization of the same batch of nanoparticles led to a bottom-up strategy for studying the structure–activity relationship. As RI is an intrinsic property of any material, the present approach is anticipated to be applicable for versatile kinds of anode and cathode materials, and to facilitate the rational design and optimization toward durable and fast-charging electrode materials.

Gold colloid changes its color when the internanoparticle distance changes. On the basis of analyte-induced aggregation or disaggregation behavior of gold nanoparticles (AuNPs), versatile colorimetric assays have been developed for measuring various kinds of analytes including proteins, DNA, small molecules, and ions. Traditional read-out signals, which are usually measured by a spectrometer or naked eyes, are based on the averaged extinction properties of a bulk solution containing billions of nanoparticles. Averaged extinction property of a large amount of nanoparticles diminished the contribution from rare events when the analyte concentration was low, thus resulting in limited detection sensitivity. Instead of measuring the averaged optical property from bulk colloid, in the present work, we proposed a digital counterpart of the colorimetric assay by imaging and counting individual AuNPs. This method quantified the analyte concentration with the number percentage of large-sized AuNPs aggregates, which were digitally counted with surface plasmon resonance microscopy (SPRM), a plasmonic imaging technique recently developed by us and other groups. SPRM was able to identify rare AuNPs aggregates despite their small population and greatly improved the detection sensitivity as demonstrated by two model systems based on analyte-induced aggregation and disaggregation, respectively. Furthermore, besides plasmonic AuNPs, SPRM is also suitable for imaging and counting nonplasmonic nanomaterials such as silica and metal oxide with poor extinction properties. It is thus anticipated that the present digitized assay holds a great potential for expanding the colorimetric assay to broad categories of nonplasmonic nanoparticles.

Previous approaches of determining the molar concentration of nanoparticles often relied on the calibration factors extracted from standard samples or required prior knowledge regarding the geometry, optical, or chemical properties. In the present work, we proposed an absolute quantification method that determined the molar concentration of nano-objects without any calibration factor or prior knowledge. It was realized by monitoring the dynamic adsorption processes of individual nanoparticles with a high-speed surface plasmon resonance microscopy. In this case, diffusing nano-objects stochastically collided onto an adsorption interface and stayed there (“hit-n-stay” scenario), resulting in a semi-infinite diffusion system. The dynamic processes were analyzed with a theoretical model consisting of Fick’s laws of diffusion and random-walk assumption. The quantification of molar concentration was achieved on the basis of an analytical expression, which involved only physical constants and experimental parameters. By using spherical polystyrene nanoparticles as a model, the present approach provided a molar concentration with excellent accuracy.

Molar concentration of gold nanoparticles is one of the most critical parameters of gold colloids in order to develop their applications in sensing, diagnostics and nanomedicine. Previous methods often stand just for gold nanoparticles with regular shape and narrow size distribution. In the present work, we proposed an absolute quantification method that determined the molar concentration of gold nanoparticles with arbitrary shapes and polydisperse sizes. This approach involved the real time monitoring and counting of individual nanoparticles collision events, from which the quantification of molar concentration was achieved using a theoretical model consisting of Fick’s laws of diffusion and Stokes-Einstein equation. The determination of spherical gold nanoparticles concentration resulted in excellent agreement with traditional spectrometry method. It was further demonstrated that the present approach can be expanded to determine the molar concentration of gold nanoparticles with arbitrary shapes and poly-diversed distributions.

•Binding kinetics of lectin–dye conjugates with glycoproteins on cells was determined.•Charge property of fluorescent dye greatly alters the binding kinetics of lectin.•Positively-charged fluorescent label promotes the association of lectin onto cells.•This effect arises from electrostatic interaction of charged dye with cell membrane.Fluorescent labeling is a mainstream technology for detecting molecular binding. Despite the importance, few studies have been devoted to quantitatively examine the effect of labeling on the molecular binding processes. Here we present a quantitative study on the binding kinetics of fluorescent-labeled and un-labeled molecules (lectin proteins) with glycoproteins on the membrane of cells using surface plasmon resonance imaging (SPRi) technique. The study shows that fluorescent labeling has a significant influence on the binding behaviors of proteins, especially the association processes, and the influence depends sensitively on the charge of fluorescent labels. It further shows that the labels also affect the local distribution of probe proteins, due to the inhomogeneous surface charge distribution of the cell membrane. Our work indicates that fluorescent labeling in general affects the binding behaviors, but proper design of the label will help to minimize its effect.

Measuring electrochemical activities of nanomaterials is critical for creating novel catalysts, for developing ultrasensitive sensors, and for understanding fundamental nanoelectrochemistry. However, traditional electrochemical methods measure a large number of nanoparticles, which wash out the properties of individual nanoparticles. We report here a study of transient electrochemical oxidation of single Ag nanoparticles during collision with an electrode and voltammetry of single nanoparticles immobilized on the electrode using a plasmonic-based electrochemical current microscopy. This technique images both electrochemical reaction and size of the same individual nanoparticle, enabling quantitative examination of size-dependent electrochemical activities at single nanoparticle level. The imaging capability further allows detection of the reaction kinetics of each individual nanoparticle and analysis of the average behaviors of multiple nanoparticles. The average kinetics and size dependence can be accurately described by the Tafel equation, but there is a large variability between different nanoparticles, which underscores the importance of single nanoparticle analysis.

Bidirectional electron transfer crossing the metal/semiconductor interface regulates the light absorption and carrier separation efficiency of plasmonic-semiconductor hybrid nanomaterials. Existing studies have been largely focused on a localized surface plasmon resonance (LSPR) effect contributed by an ensemble of metal nanomaterials. Herein, we constructed a Schottky junction that consisted of single CdS nanoparticles and a planar gold film, and investigated hot electrons excited by the surface plasmon polaritons (SPPs) propagating in the gold film. When illuminating the interface with blue light, photoinduced electrons were found to inject from the CdS nanoparticle to the gold film. In a reverse process, SPPs were generated on shining a red beam into the gold film via a Kretschmann configuration, resulting in the injection of hot electrons into CdS nanoparticles. A recently developed plasmonic microscopy method was employed to monitor the entire process, providing the ability to image a single nanoparticle to visualize the bidirectional electron transfer dynamics in a Schottky junction involving propagating SPPs. The present study advances the understanding of the mechanism of hot electron transfer, which is anticipated to aid in the rational design and optimization of plasmonic-semiconductor hybrid nanomaterials with broad applications in photocatalysis, photovoltaic devices, and photoelectrochemical sensing.