Organic ternary heterojunction photovoltaic blends are sometimes observed to undergo a gradual evolution in open-circuit voltage (V_oc) with increasing amounts of a second donor or an acceptor. The V_oc is strongly correlated with the energy of the charge transfer state in the blend, but this value depends on both local and mesoscopic orders. In this work, the behavior of V_oc in the presence of a wide range of interfacial electronic states is investigated. The key charge transfer state interfaces responsible for V_oc in several model systems with varying morphology are identified. Systems consisting of one donor with two fullerene molecules and of one acceptor with a donor polymer of varying regio-regularity are used. The effects from the changing energetic disorder in the material and from the variation due to a law of simple mixtures are quantified. It has been found that populating the higher-energy charge transfer states is not responsible for the observed change in V_oc upon the addition of a third component. Aggregating polymers and miscible fullerenes are compared, and it has been concluded that in both cases charge delocalization, aggregation, and local polarization effects shift the lowest-energy charge transfer state distribution.

Side-chain engineering is increasingly being utilized as a technique to impact the structural order and enhance the electronic properties of semiconducting polymers. However, the correlations drawn between structural changes and the resulting charge transport properties are typically indirect and qualitative in nature. In the present work, a combination of grazing incidence X-ray diffraction and crystallographic refinement calculations is used to determine the precise molecular packing structure of two thiophene-based semiconducting polymers to study the impact of side-chain modifications. The optimized structures provide high-quality fits to the experimental data and demonstrate that in addition to a large difference in interchain spacing between the two materials, there exists a significant disparity in backbone orientation as well. The calculated structures are utilized in density functional theory calculations to determine the band structure of the two materials and are shown to exhibit a dramatic disparity in interchain dispersion which accounts for the large observed difference in charge carrier mobility. The techniques presented here are meant to be general and are therefore applicable to many other highly diffracting semicrystalline polymers.

In this work, crystallization kinetics and aggregate growth of poly(3-ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X-ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time-dependent, field-effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter-aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.

Using X-ray diffraction-based pole figures, we present quantitative analysis of the microstructure of poly(3-hexylthiophene) thin films of varying thicknesses, which allows us to determine the crystallinity and microstructure at the semiconductor-dielectric interface. We find that the interface is approximately one fourth as crystalline as the bulk of the material. Furthermore, the use of a self-assembled monolayer (SAM) enhances the density of interface-nucleated crystallites by a factor of ∼20. Charge transport measurements as a function of film thickness correlate with interface crystallinity. Hence, we establish the crucial role of SAMs as nucleating agents for increasing carrier mobility in field-effect devices. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013

Factors affecting charge transport through ZnO nanowire mat films were studied by aligning ZnO nanowires on substrates and coupling experimental measurements with 2D nanowire network simulations. Gallium doped ZnO nanowires were aligned on thermally oxidized silicon wafer by shearing a nanowire dispersion in ethanol. Sheet resistances of nanowire thin films that had current flowing parallel to nanowire alignment direction were compared to thin films that had current flowing perpendicular to nanowire alignment direction. Perpendicular devices showed ∼5 fold greater sheet resistance than parallel devices supporting the hypothesis that aligning nanowires would increase conductivity of ZnO nanowire electrodes. 2-D nanowire network simulations of thin films showed that the device sheet resistance was dominated by inter-wire contact resistance. For a given resistivity of ZnO nanowires, the thin film electrodes would have the lowest possible sheet resistance if the inter-wire contact resistance was one order of magnitude lower than the single nanowire resistance. Simulations suggest that the conductivity of such thin film devices could be further enhanced by using longer nanowires.

The performance of semiconducting polymers has been steadily increasing in the last 20 years. Improved control over the microstructure of these materials and a deeper understanding of how the microstructure affects charge transport are partially responsible for such trend. The development and widespread use of techniques that allow to characterize the microstructure of semiconducting polymers is therefore instrumental for the advance of these materials. This article is a review of the characterization techniques that provide information used to enhance the understanding of structure/property relationships in semiconducting polymers. In particular, the applications of optical and X-ray spectroscopy, X-ray diffraction, and scanning probe techniques in this context are described.